论文部分内容阅读
该裂变气体测压系统配以膜片式压力传感器,用于核燃料元件内压的测量,进行燃料元件堆内行为的研究。其流程如图1所示。整个系统装在一个密封柜内,使用时置于工艺间,通过长的导气管与反应堆内诸压力传感器相连。系统通过长电缆与控制室的控
The fission gas pressure measurement system is equipped with a diaphragm pressure sensor for the measurement of the internal pressure of the nuclear fuel element and the behavior of the fuel element in the reactor. The process shown in Figure 1. The entire system is housed in a sealed cabinet that, when used, is placed in the process room and connected to pressure sensors in the reactor via long air ducts. The system is controlled by a long cable and control room