本公司ZL50E型装载机的工作装置在运动过程中存在着一些问题,其中比较突出的就是各位置收斗角参数不够理想,最低位置时为42°,运输位置(此时斗销离地450mm)为45.7°,最高位置(此时斗销离地3800mm)为57°。由于工作装置运动的平移角度(即铲斗在上下极限位置的后倾角差值)为15°, There are some problems in the working device of the ZL50E loader of our company during the movement, among which the most prominent is that the parameters of the collection angle are not ideal at each position, the lowest position is 42 °, the transportation position (at this time, the sales is 450mm away from the ground) For 45.7 °, the highest position (3800mm fighting off the ground at this time) is 57 °. Due to the translational movement of the working device (ie, the difference between the back-dip angle of the bucket at the upper and lower limit positions) is 15 °,