Ionic self-diffusion coefficient and shear viscosity of high-Z materials in the hot dense regime

来源 :MatterandRadiationatExtremes | 被引量 : 0次 | 上传用户:gushangchen
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
High-Z materials exhibit a broad range of variation of the charge state in the hot dense regime, and so ionic structures become complex with increasing density and temperature owing to ionization. Taking high-Z uranium as example, we study its electronic and ionic structures in the hot dense regime by combining an average-atom model with the hypernetted chain approximation. The electronic structure is described by solving the Dirac equation, taking account of relativistic effects, including broadening of the energy levels, and the effect of other ions via correlation functions. On the basis of the electronic distribution around a nucleus, the ion pair potential is constructed using the modified Gordon–Kim model in the frame of temperature-dependent density functional theory. Because of the presence of ion–ion strong coupling, the bridge function is included in the hypernetted chain approximation, which is used to calculate the correlation functions. To take account of the influence on transport properties of the strong correlation of electrons with highly charged ions, we perform both classical and Langevin molecular dynamics simulations to determine ion self-diffusion coefficients and the shear viscosity, using the Green–Kubo relation and an ion–ion pair potential with good convergence. We show that the influence of electron–ion collisions on transport properties becomes more important as the free electron density increases owing to thermal ionization.
其他文献
目前,对铜蒸气激光器的能量特性与气体放电参数的依赖关系还未有系统的研究。本工作获得了铜的绿色谱线振荡的比能量(功率输出)与脉冲气体放电的诸参量——如电容器上的电压振幅、放电电流密度的增长速度、铜蒸气及缓冲气体的气压之间的依赖关系。
期刊
基于椭偏仪实验测量的材料表面镜反射率谱数据,分析和结合了多种常用的光滑样片模型的优点,提出了适用于光滑样片的镜反射率谱模型。分析了多种光滑样片在多个波段下的参数值和均方根误差,证明了该模型可以用于拟合光滑样片的镜反射率谱数据。比较了该模型与五参数双向反射分布函数(BRDF)模型,通过对该函数模型的上半空间积分,与实验测量的材料表面半球反射率比较,验证了该反射率模型的正确性。结果表明,该模型不仅能满足能量守恒定律和互易性,而且对光滑样片,该模型是BRDF模型的理想替代。
A wireless powered small volume light source composed of light emitting diode (LED) array is developed for implantation. According to the volt-ampere characteristics of LED and the load characteristics of coil coupling power supply, the light power and wo
期刊
1976年6月6~11日在挪威的疗养地洛恩城召开了一次《可调谐激光器及其应用》的国际会议,这次会议涉及到可调谐激光器及其在光化学、化学动力学、同位素分离、大气和电离层光化学、远距离诊断、光生物学和光谱学中的应用。频率调谐激光器在广泛的科技领域中的日趋扩大的应用及很多国家中从事此项工作的数百名研究者,这些事实都迫切要求召开这样一次专业会议。参加这次会议的有来自15个国家的132名科学家。会议由挪威和美国组织。组织委员会主席是美国马萨诸塞理工学院林肯实验室的A. Mooradian,大会主席是挪威防卫研究管理
期刊
光性能监测是实现可重配置波分复用光网络的一个关键技术。随着光通信速度从10 Gb/s提升到40 Gb/s甚至以上, 对光通道残余色散的容忍度下降到原来的1/16甚至以下, 需要对光通道的色散进行实时监测。利用非线性波导器件可进行全光域色散监测, 硅光波导具有较强的非线性特性, 其非线性折射率系数可达5×10-18 m2/W。当受光网络色散作用的信号光和探测光一起通过硅波导时, 将产生四波混频非线性效应, 光通道中不同色散值会产生不同程度的四波混频效应, 通过测量由四波混频效应产生的光谱变化结果, 可对波分
期刊
1689-nm diode lasers used in medical apparatus have been fabricated and characterized. The lasers had pnpn InP current confinement structure, and the active region consisted of 5 pairs of InGaAs quantum wells and InGaAsP barriers. Stripe width and cavity
采用高温固相法制备了ZnMoO4∶Tb3 绿色荧光粉,对样品进行了X射线衍射(XRD)和荧光光谱测定。XRD结果表明,样品在800℃时能得到单一ZnMoO4相。激发光谱由1个宽带峰和若干个尖峰组成,宽带属于Mo6 —O2-电荷迁移吸收带(CT),并且发现宽带峰位随Tb3 掺杂浓度增加而出现蓝移,尖峰属于Tb3 的4f—4f跃迁,最强激发峰位于377 nm处。发射光谱由四组峰组成,最强发射峰在543 nm处,对应于Tb3 的5D4—7F5跃迁,属于磁偶极跃迁。研究了ZnMoO4∶Tb3 荧光粉在543 nm
以马赫-陈德尔波导干涉仪为基础的集成光学调制器,由于结构比较简单以及在集成光路的给定晶体长度下控制电压较低,是一种有前途的振幅调制器。由于这些性质,这种调制器不仅用于光纤通信技术,也可用作电压的光学传感器[1,2]。
期刊
通过分子束外延(MBE)生长技术,在GaAs(100)基片上生长出单晶InxGa1-xAs薄膜,利用反射高能电子衍射仪(RHEED)实时监控薄膜生长情况。对InxGa1-xAs薄膜进行了X射线衍射(XRD)测试,结果显示该薄膜为高质量薄膜,且