Kinetics model was developed for the mixed (steam and dry) reforming of methane, which is useful for the control of H2/CO ratio. The equilibrium constants of reaction rate were determined using the experimental equilibrium data at different reaction temperatures, while the forward reaction rate constants were estimated using the experimental data under non-equilibrium (high inert fraction and high space velocity) conditions. The comparison between calculated and experimental data clearly showed that the developed model described satisfactorily, and further analysis using the parametric sensitivity determined the wall temperature and CO2 fraction in the feed gas as effective parameters for the manipulation of CH4 conversion and H2/CO ratio of synthesis gas under the equilibrium condition. Meanwhile, the inert fraction, rather than the residence time, was selected as additional parameter under non-equilibrium condition. Kinetics model was developed for mixed (steam and dry) reforming of methane, which is useful for the control of H2 / CO ratio. The equilibrium constants of reaction rate were determined using the experimental equilibrium data at different reaction temperatures, while the forward reaction rate comparison of the experimental data under non-equilibrium (high inert fraction and high space velocity) conditions. The comparison between calculated and experimental data clearly showed that the developed model discloses satisfactorily, and further analysis using the parametric sensitivity determined the wall temperature and CO2 fraction in the feed gas as effective parameters for the manipulation of CH4 conversion and H2 / CO ratio of synthesis gas under the equilibrium condition. condition.