专业音箱因过载、话筒跌落或调试不当,高音头容易损坏,高音头价格高且一时不易买到。本人重新绕制飞达1892型音箱高音头效果不错。向读者介绍一下。具体方法如下: 1.音圈的折卸 打开音箱前罩,取出高音号角,拔掉高音连接线,拆下四个螺钉,取下高音头底座,稍用力推接线柱,将振动膜支架推出,撕掉强力胶粘接纸,割断两端引线,取下高音头振动膜,如图1所示,用香蕉水 Professional speakers due to overload, microphone drop or improper debugging, easy to damage the treble head, treble head high price and not easy to buy. I re-wound Feida 1892 speaker treble head good results. Tell the reader about it. The specific method is as follows: 1. Disassembly of the voice coil Open the front cover of the speaker, remove the treble horn, unplug the treble cable, remove the four screws, remove the treble head base, slightly push the post, push the vibrating membrane bracket , Tear off the strong adhesive paper, cut off both ends of the lead, remove the treble head vibrating membrane, as shown in Figure 1, with banana water