论文部分内容阅读
精细设备管理水平,提高采油时率一直是采油管理区的工作目标。在日常生产管理过程中,油井由于生产动态的变化,井场需要对油井进行参数的调整,其中以调整冲次为主,也就是通过更换不同直径的电机皮带轮来达到改变油井冲次的目的,使抽油机在最合理的工作制度下进行生产。但是在日常调整过程中,由于抽油机电机及皮带轮规格型号较多导致安装操作繁锁,皮带轮损耗大、库存高,工人劳动强度高效率低等实际生产问题。针对以上实际问题我们研制了抽油机电动机通用锥套,并进行了推广,取得了较好的效果。
Fine equipment management level, improve the oil production rate has been a production management area of ?? the target. In the process of daily production management, due to the change of production dynamics, the wellsite needs to adjust the parameters of the oil well. The adjustment is mainly based on the adjustment of the impeller. That is, the purpose of changing the well flushing is achieved by changing the motor pulleys with different diameters. The pumping unit in the most reasonable working system for production. However, in the daily adjustment process, due to the large number of specifications of the pumping motor and pulley, the installation and operation are complicated, the loss of the pulley is large, the inventory is high, and the labor intensity of the worker is high and the production efficiency is low. In view of the above practical problems, we developed a general-purpose motor-driven taper sleeve, and carried out promotion, and achieved good results.