论文部分内容阅读
Morphology Study of Oriented SmBCO Film Deposited by MOCVD
【机 构】
:
State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University
【出 处】
:
武汉理工大学学报(材料科学版)(英文版)
【发表日期】
:
2016年1期
其他文献
Highly Heat-Resistant Materials for Microelectronics:Hydrodynamic, Optical, and Conformational Prope
The polycondensation of the mixture of diamines 5,5-methylene bis(2-aminophenol) and 4,4-(hexafluoroisopropylidene)dianiline (molar ratio 0.8:0.2) with isophthaloyl dichloride was used to synthesize poly(amido-o-hydroxy amide) (POA-F) - new heat resistant
Effect of Extrusion Temperatures on Friction-wear Behavior of Chain-wheel Fabricated by 40Cr Steel u
A 40Cr steel was formed into a chain-wheel using a warm extrusion technology. The surface roughness and micro-structure, micro-hardness and phases of the extruded samples at different temperatures were analyzed using a three-dimensional optical microscope
C 3 S pastes containing 0%,5%,10%,and 15% nano-SiO2 mixed with de-ionized water and alkali solutions were prepared.When C 3 S was completely hydrated,the pastes were ground into powders with a particle size less than 80 μm.Adsorption and desorption charac
Influences of Ignition Temperature,Urea-to-Metal Nitrates Molar Ratio,and Further Calcination on Syn
The self-propagating combustion reaction(SPCR)method was employed to synthesize C4AF using metal nitrates as cation precursors and urea as fuel.Thermal decomposition behavior of dried gels,phase identification and crystallinity of synthesized C4AF,and imp
Tensile Properties of 3-Dimension-4-directional Braided Cf/SiC Composite based on Double-scale Model
The longitude tensile properties of 3-Dimension-4-directional(3D-4d) braided C/SiC composites(CMCs) were investigated with the help of a double scale model. This model involves micro-scale and unit-cell scale. In micro-scale, the tensile properties of fib
An Optical Investigation of Silver Nanoclusters Composite Soda-lime Glass Formed by Electric Field A
Silver nanoclusters (NCs) embedded in soda-lime glass was synthesized by the electric fieldassisted diffusion (EFAD) and successive annealing.The samples were characterized by UV-Vis absorption spectroscopy,photoluminescence spectroscopy,X-ray photoelectr
Impurities from the raw materials, the grinding and the homogenization of the raw materials, the kiln instability and the complexity of the cooling step, all these factors make it difficult to obtain a perfect evaluation of the mineralogical composition o
Fabrication and Characterization of Poly Lactic Acid Scaffolds by Fused Deposition Modeling for Bone
Three-dimensional porous poly-lactic acid (PLA) scaffold was fabricated using fused deposition modeling (FDM) method including 30%, 50% and 70% nominal porosity. Study of phases in initial polymeric material and printed scaffolds was done by X-ray diffrac