Hot deformation behavior and processing map of low-alloy offshore steel

来源 :钢铁研究学报(英文版) | 被引量 : 0次 | 上传用户:jumty
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The hot deformation behavior of a low-alloy offshore steel was systematically investigated within the temperature range of 850-1150℃and strain rate range of 0.01-10 s-1,via hot compression testing.The hot working equation,grain size model and recrystallization kinetic models of the steel were developed by fitting the experimental data.The results show that the decrease in Zener-Hollomon Z-parameter value(the increase in deformation temperature and the decrease in strain rate)is beneficial for the occurrence of dynamic recrystallization,and the grain size can be refined by increasing the Z-parameter value within the deformation range of dynamic recrystallization.However,when the Z-parameter value is higher than 3.43×1016,dynamic recrystallization will be difficult to occur within the range of experimental deformation conditions.Additionally,processing maps at different strains were constructed.According to the processing map and microstructural analysis,the optimal hot working conditions of the studied steel are within the temperature range of 1000-1100℃and strain rate range of 0.1-1 s-1,and a complete recrystallization microstructure with fine homogeneous grains could be obtained.
其他文献
Reducing the NOx emission from pelletizing process is of great importance to the green development of iron and steel industry.The flue gas temperature of preheating(PH)section during grate-kiln iron ore pelletizing process typically ranges within 850-1050
KR脱硫的渣资源化利用有利于促进钢铁企业的绿色化发展.KR脱硫渣中主要成分为CaO,且含有质量分数为1.0%~2.5%的硫,直接将K R脱硫渣回用于冶炼工艺会导致钢液增硫.若能将渣中的硫脱出,可有效促进KR脱硫渣在钢铁冶炼工艺的资源化利用.因此,针对当前KR脱硫渣综合利用存在的问题,总结分析有关CaS氧化过程的热力学和动力学研究现状,探究将KR脱硫渣中硫转化成为SO2的有利条件,分析将KR脱硫渣用于转炉造渣脱磷的可行性,以实现KR脱硫渣的冶金内循环利用.KR脱硫渣中的硫主要以CaS形式赋存在渣中,高温(温
The mathematical model of coupling fluid flow,heat transfer,solidification,solute transport,and the electromagnetic field of the bloom in the upper part of the strand was established with three nozzle types.Then,the flow field,distribution of the temperat
Multiple precipitating species in a 2.2 GPa grade precipitation-hardened martensitic stainless steel with balanced ductility were characterized at atomic scale by atom probe tomography.The results indicated that the clustering of solute atoms was promoted
Porous metals are a class of cellular materials with lightweight and unique mechanical,electrical,thermal,physical and acoustic characteristics.Magnesium and magnesium alloy foams have exhibited excellent advantages.In particular,open-cell Mg-based foams(
To investigate the transient transport and entrapment of argon bubbles and inclusions simultaneously during continuous casting,a 3D large eddy simulation model coupling molten steel flow,solidification and particle motion was constructed.In this model,mom
The interfacial oxygen transfer rate is one of the main factors to control the composition of alloys.The commonly employed method of studying the interfacial oxygen transfer rate is the chemical composition analysis;however,it is difficult to be studied i
Gas-liquid flow and bubble coalescence and breakup behavior were studied in a top blown-rotary agitated reactor for steelmaking.Several important models of bubble coalescence and breakup mechanisms were considered and compared,and water model experiment w
对我国流行的孕育类App进行话语分析,描绘了商业应用中再现的母职话语及母职形象.研究认为,App借助多种话语的力量,塑造了学习型、快乐型、分享型的母职图像.相互交织的母职话语,共同影响着女性的母职认知、母职实践.