论文部分内容阅读
净化厂在生产过程中经常出现仪表故障现象,由于检测与控制过程中出现的故障现象比较复杂,正确判断、及时处理生产过程中仪表故障,不但直接关系到生产的安全与稳定,同时,也涉及到产品的质量和消耗。现阶段自动化水平的不断提高,对现场仪表维护人员的技术水平提出了更高要求,要随时对生产过程中使用的仪表进行维护并能对常见故障及时处理。本文根据第三净化厂检测仪表常见的故障,对仪表维护及运行中出现的故障现象进行分析与处理的分别阐述,总结出故障解决方法的具体思路。
Purification plant in the production process often appear instrument failure phenomenon, due to the detection and control of the phenomenon of the more complex phenomenon, the correct judgments, timely processing instrument failure in the production process, not only directly related to the safety and stability of production, but also involves To product quality and consumption. At this stage of continuous improvement of the level of automation, on-site instrumentation maintenance staff of the technical level of the higher requirements, to keep the instruments used in the production process maintenance and timely treatment of common failures. This article according to the third purification plant testing instruments common fault, instrument maintenance and operation of the fault phenomenon analysis and processing were elaborated, summed up the troubleshooting of the specific ideas.