A theoretical and experimental study on no-guide light pen type 3D-coordinate measurement system

来源 :ChineseOpticsLetters | 被引量 : 0次 | 上传用户:sunj2009
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
A novel no-guide light pen type 3D-coordinate measurement system with three sets of position sensitive devices (PSDs) to realize intersection converge imaging is introduced. It is called as the light pen type measurement system, because the measuring head is shaped as a pen with several light sources on it. The structure design, measurement principle and experimental results are presented. The theoretical analysis and experimental results prove that this system has advanced features of simple structure, high automation, and high accuracy, and can be used in the measurement fields of mechanical manufacture, robot, auto, aviation and medicine effectively.
其他文献
利用激光对动脉粥样硬化的诊断和治疗方法近十多年来国内外已有不少报道,为了进一步增强对斑块的探测,提出一种新的方法。在进行激光血管成形术时,对斑块先用β胡萝卜素进行预处理,再用488 nm激光激发,可大大增强对斑块激光感生总荧光的探测。β-胡萝卜素使斑块的总荧光发射明显衰减,实验结果与理论分析高度相关,可望在诊断和治疗中同时得到应用。
Optical logical operations demonstrate the key role of optical digital computing, which can perform general-purpose calculations and possess fast processing speed, low crosstalk, and high throughput. The logic states usually refer to linear momentums that
期刊
实验上首次发现一种新型非线性调Q元件——LiF:F_2~-晶体。它综合了晶体及染料调Q的优点,是一种理想的调Q及锁模元件。
期刊
期刊
介绍了采用迈克尔逊干涉仪测量压电材料复压电常数的新方法。干涉仪中一个平面反射镜与被测试样粘为一体,另一个与控制压电陶瓷粘为一体。利用光电二极管和两相锁相放大器对干涉图像进行转换和放大测量。被测试样长度形变的检测分辨率可达0.6pm。文章给出了对PZT系列PXE5型压电陶瓷d'31、d″31与温度、频率关系的测量结果,温度范围为-60~90℃,频率范围为2.5Hz~2.5kHz。
期刊
利用已搭建的2.52 THz焦平面成像装置和离轴数字全息装置,通过分辨率测量和水印及铅笔字成像,研究了焦平面成像和离轴数字全息成像这两种面阵成像的性能。实验证明,常规的焦平面成像由于太赫兹波长较长,很难获得较高的成像分辨率,且成像效果受放置位置的影响严重;太赫兹离轴数字全息成像可以提高成像分辨率,但成像物体大小受系统分辨率制约;焦平面成像较离轴面阵数字全息成像更适于大目标低分辨率成像。
By adopting noise initiation model of stimulated Brillouin scattering (SBS), the influence of phonon lifetime and gain coefficient of medium on power limiting characteristic is numerically investigated. Through using actual parameters of three media, CCl4
We demonstrate that the maximum coherent superposition state can be selectively prepared using a sequence of pulse pairs in lambda-type atomic systems, with the final level as a doublet. In each pair, the Stocks pulse comes before the pump pulse, with the
高纯度的耐熔金属膜,在采用一种新的所谓收气溅射的淀积技术之后,制备简单、容易,不用超高眞空。这种收气溅射方法,是将淀积的金属作为类似电子管中的一种“收气剂”,它和管中不需要的气体杂质起反应,并消除这些杂质。
期刊