Effect of moisture on the aging behavior of asphalt binder

来源 :矿物冶金与材料学报 | 被引量 : 0次 | 上传用户:gege1232000
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The moisture aging effect and mechanism of asphalt binder during the in-service life of pavement were investigated by laboratory simulating tests.Pressure aging vessel (PAV) test simulating the long-term aging of binder during the in-service life of pavement was modified to capture the long-term moisture aging effect of binder.Penetration grade tests including penetration test,soften point test,and ductility test as well as SuperpaveTM performance grade tests including viscosity test,dynamic shear rheometer test,and bending beam rheometer test were conducted to fully evaluate the moisture aging effect of binder.Fourier transform infrared spectroscopy test and Gel-permeation chromatography test were applied to provide a fundamental understanding of the moisture aging mechanism of binder.The results indicate that moisture condition can accelerate the aging of asphalt binder and shorten the service life of asphalt binder.The modified PAV test with moisture condition can well characterize the moisture aging properties of asphalt binder.
其他文献
A combined computational and experimental investigation to examine temperature and soot volume fraction in coflow ethylene-air diffusion flames was presented.A
An alloy steel/alumina composite was successfully fabricated by pressureless infiltration of X10CrNi18-8 steel melt on 30% (mass fraction) Ni-containing alumina
The influence of aging on the microstructure and mechanical properties of Cu-11.6wt%Al-3.9wt%Ni-2.5wt%Mn shape memory alloy(SMA) was studied by means of scannin
城市的发展离不开城市基础设施的建设,而现代基础设施的建设也是一个城市文化的标志物,但是随着建筑设计中逐渐消失了的传统文化,也使得城市自己的特色在逐渐的流失,一个城市独有
An aluminum/copper clad composite was fabricated by the casting-cold extrusion forming technology and the microstructures of the products were observed and anal
To overcome the deficiencies addressed in the conventional PID control and improve the dynamic performance and robustness of the system,a simple design and para
Cerium conversion treatment was applied on magnesium coatings in a solution containing CeCl3.The composition of the cerium conversion layer on magnesium was inv
According to the characteristic and the requirement of multipath planning,a new multipath planning method is proposed based on network.This method includes two
以槽式太阳集热器为研究对象,建立集热器的传热流动数学模型,通过Fluent模拟,研究其传热、流动性能,并对模拟结果进行实验对比验证,对比结果表明二者吻合较好。在此基础上,分
The selection of titanium alloys has become a complex decision-making task due to the growing number of creation and utilization for titanium alloys,with each h