【摘 要】
：
Functionalized ionic liquids (FILs) as extractants were employed for the separation of tungsten and molybdenum from a sulfate solution for the first time. The effects of initial pH, extractant concentration, metal concentrations in the feed were comprehen
【机 构】
：
School of Resource and Civil Engineering, Northeastern University, Shenyang 110819, China;Zhengzhou
【出 处】
：
International Journal of Minerals, Metallurgy and Materials
论文部分内容阅读
Functionalized ionic liquids (FILs) as extractants were employed for the separation of tungsten and molybdenum from a sulfate solution for the first time. The effects of initial pH, extractant concentration, metal concentrations in the feed were comprehensively investigated. The results showed that tricaprylmethylammonium bis(2,4,4-trimethylpentyl)phosphinate ([A336][Cyanex272]) could selectively extract W over Mo at an initial pH value of 5.5; the best separation factor βW/Mo of 25.61 was obtained for a solution with low metal concentrations (WO3: 2.49 g/L, Mo: 1.04 g/L). The [A336][Cyanex272] system performed effectively for solutions of different W/Mo molar ratios and different metal ion concentrations in the feed. The chemical reaction between [A336][Cyanex272] and W followed the ion association mechanism, which was further proved by the Fourier-transform infrared (FTIR) spectra of loaded [A336][Cyanex272] and the free extractant. The stripping experiments indicated that 95.48% W and 100.00% Mo were stripped using a 0.20 mol/L sodium hydroxide solution. Finally, the selective extractions of W and Mo from two synthetic solutions of different high metal concentrations were obtained; the separation factor βW/Mo reached 23.24 and 17.59 for the first and second solutions, respectively. The results suggest the feasibility of [A336][Cyanex272] as an extractant for the separation of tungsten and molybdenum.
其他文献
艺术设计离不开立体构成,立体构成也是艺术设计审美中最重要的组成部分.立体构成主要着重于构造空间立体模型,换言之,立体构成就是将某种造型展示在三维空间中,形成一种立体感和在固定空间中的形态,而环境设计则是指利用立体构成技术的方式,将某建筑的内外环境空间二次建造的过程,并通过该技术将实际物质进行空间构造.
环保约谈是中央生态环保督察工作中重要环节之一,能够有效缓解经济发展与环境保护之间的关系.环保约谈作为一种软约束力,能够有效监督地方政府提高环保意识,规范企业排污规范化,但依旧存在着相关法律制度不完善、监管部门不到位、公众环保意识薄弱等问题.在我国大力推动生态环保督察的背景下,对环保约谈这种监督方式进行探讨并提出完善建议.
“城中村”是我国社会发展中一种不可回避的社会现象,是城乡二元化在城镇化进程中的产物.由于“城中村”建设先天缺少消防规划,建筑密度过大,居住人员缺乏消防安全意识,已成为火灾事故频发的重灾区.
Hot compression tests were performed on AISI 321 austenitic stainless steel in the deformation temperature range of 800–1200°C and constant strain rates of 0.001, 0.01, 0.1, and 1 s−1. Hot flow curves were used to determine the strain hardening exponent a
Cobalt (Co)-modified brownmillerite KBiFe2O5 (KBFO; [KBiFe2(1−x)Co2xO5 (x = 0, 0.05)]) polycrystalline is synthesized following the solid-state reaction route. Rietveld refinement of X-ray diffraction data confirmed the phase purity of KBFO and KBiFe1.9Co
随着现代社会的发展,电视新闻工作者的工作内容不仅是为广播站服务,还需要在一些媒体上面进行一些新闻的发布以及一些其他的工作,但是按照以前的工作模式很难完成这样的工作,因此媒体融合的重要性就显现出来了.
The microstructural properties and electrochemical performance of zinc (Zn) sacrificial anodes during strain-induced melt activation (SIMA) were investigated in this study. The samples were subjected to a compressive ratio of 20%–50% at various temperatur
MnO2/biomass carbon nanocomposite was synthesized by a facile hydrothermal reaction. Silkworm excrement acted as a carbon precursor, which was activated by ZnCl2 and FeCl3 combining chemical agents under Ar atmosphere. Thin and flower-like MnO2 nanowires
Reaction-bonded B4C–SiC composites are highly promising materials for numerous advanced technological applications. However, their microstructure evolution mechanism remains unclear. Herein, B4C–SiC composites were fabricated through the Si-melt infiltrat
3Y-TZP/3wt% Al2O3 powder was coated with varying amounts of BN using the urea and borate reaction sintering method, and then multiphase ceramics were prepared by hot pressing sintering. The micro-topography and the compositional analysis of synthesized ce