【摘 要】
：
An alternative technique for infrasound detection based on the self-mixing (SM) interference of a laser diode is described. The principle involved is the dependence of the power emitted by the laser diode on infrasound-induced membrane vibration. The Four
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
An alternative technique for infrasound detection based on the self-mixing (SM) interference of a laser diode is described. The principle involved is the dependence of the power emitted by the laser diode on infrasound-induced membrane vibration. The Fourier transform and fringe-counting methods are used to analyze the self-mixing signal. Infrasound signals are experimentally measured from 2 to 20 Hz with a resolution of 0.25, and the results well agree with the theoretical ones.
其他文献
日本日立建机公司研制成会聚性能好、适合陶瓷材料微加工的LU30、LU100、LU300、LU450系列共计4种YAG激光加工机，平均输出分别为30 W、100 W、300 W、450 W。它们将进入激光加工机领域。采用瑞士一家公司制造的激光振荡器。
比较了高通量密度下损伤点分别位于上游介质的前后表面时热像的位置及峰值光强的区别。讨论了热像交替排布的现象及峰值光强随损伤点尺寸的变化规律。针对上游光学元件中的损伤点是诱发后续光路中热像的主要因素, 提出了以损伤点经一定传输距离后引起的衍射环图像为分析对象的热像预判技术。该技术运用高信噪比的梯度方向匹配算法来获取衍射环图像的特征信息, 进而反演出衍射距离和损伤点尺寸。利用液晶空间光调制器产生的单个等效损伤点的衍射图像证明了该方法的有效性; 并采用光学元件上实际存在的损伤点所引起的衍射环图像分析了该算法反演多
Gap-surface plasmon (GSP) metasurfaces have attracted progressively increasing attention due to their planar configurations, ease of fabrication, and unprecedented capabilities in manipulating the reflected fields that enable integrating diverse bulk-opti
双焦镜片的附加屈光度区是偏离主屈光度区, 偏心位置要求严格, 在实际生产中不易控制容易产生误差, 不适应批量生产。提出了一种设计方案, 在偏心铣磨加工中对镜片一次装夹, 解决了由于定位基准造成的附加屈光度区光轴方向偏差, 与后道工序精磨的定位配合问题。所提夹具在实际中使用中具有良好的加工工艺性和经济性。
In this paper, we produce porous silicon (PSi) by electrochemical etching, and it is the first time to evaluate the performance of label-free porous silicon biosensor for detection of variable domain of heavy chain of heavy-chain antibody (VHH). The bindi
当前荧光分子层析(FMT)技术因假设背景光学结构均匀而导致其灵敏度、定量性和空间分辨率等主要指标与实际应用要求存在一定的差距,而基于区域标识的"粗粒度"扩散光学层析成像(区域DOT)重建算法在目标体结构先验信息的支持以及光学特性分区均匀性自然假设下能够有效获取目标体的光学结构,展开了提高FMT技术成像灵敏度的稳态测量模式下区域DOT/FMT混合成像方法的研究。数值模拟中以含有区域标记的光学数字鼠模
A practical two-stage double-pass structure using high concentration erbium-doped fiber and 1480-nm pump laser diode is suggested for a high power and broad bandwidth erbium-doped superfluorcscent fiber source. A considerable increase in output power and
基于离轴三反光学系统和多列线阵探测器,设计了一种具有宽波段高光谱分辨率的中阶梯光栅光谱仪。首先,以仪器性能指标为约束优化中阶梯光栅的结构参数,使光栅在保证高色散的同时将宽工作波段折叠重合在较小的光谱级次内,并采用多列线阵探测器采集信号。然后,以离轴三反光学系统作为会聚镜,以离轴抛物镜作为准直镜,实现了高色散宽自由光谱的像差校正。最终,设计的中阶梯光栅光谱仪工作波段为400~900 nm,F数为4.5,光谱分辨率在402.31,541.82,870.48 nm时分别为0.003,0.004,0