轴类零件在车床上加工完毕之后,通常都要在工件的端面进行倒角;即使图纸上没有规定,但有经验的车工也会在工件加工完了之后,顺便把角倒出,这已成了习惯。但倒角时一般需要小拖板进行径向移动。为了提高加工精度和生产效率,以求达到数质兼优的目的,工段长周绍基同志针对这一点进行研究,终于创造了自动倒角装置。我们认为这一经验普遍性较大,可供兄弟厂工人同志参考,现分别介绍如下。 1.倒角装置自动倒角装置如附图所示。1是靠模托架,用三角铁焊接制成,固定在大拖板6上。2是靠模,材料用低 Shaft parts are usually chamfered on the end face of the workpiece after machining on the lathe. Even if not specified on the drawing sheet, an experienced lathe will pour out the corner after the work piece has been processed habit. However, chamfer generally require a small carriage for radial movement. In order to improve the machining accuracy and production efficiency, in order to achieve the number of both good and the purpose of section commander Zhou Shaoji research for this point, and finally created an automatic chamfering device. We think that this experience is more universal and can be used as a reference to the brothers and factory workers’ comrades. Now we introduce them as follows respectively. 1. Chamfering device automatically chamfering device shown in the figure. 1 is by the model bracket, welded with a triangular iron, fixed on the large carriage 6. 2 is by the mold, the material is low