【摘 要】
：
In tube hydroforming with axial feeding, under the effect of coupled internal pressure and axial stress, wrinkles often occur and affect the forming results. Wr
【机 构】
：
School of Materials Science and Engineering
论文部分内容阅读
In tube hydroforming with axial feeding, under the effect of coupled internal pressure and axial stress, wrinkles often occur and affect the forming results. Wrinkling behavior of an AZ31B magnesium alloy tube was experimentally investigated with different loading paths at different temperatures. Features of wrinkles, including shape, radius and width, were acquired from the experiments, as well as the thickness distribution. Numerical simulations were carried out to reveal the stress state during warm hydroforming, and then the strain history of material at the top and bottom of the wrinkles were analyzed according to the stress tracks and yielding ellipse. Finally, effects of loading paths on expansion ratio limit of warm hydroforming were analyzed. It is verified that at a certain temperature, expansion ratio limit can be increased obviously by applying a proper loading path and realizing enough axial feeding.
其他文献
目的 比较轮状病毒Wa株和SA11株对MA104细胞的感染及复制能力,研究不同毒株对宿主细胞的感染效力.方法 差速离心浓缩病毒颗粒,FFA法检测病毒滴度,流式细胞术检测病毒对MA104
The fracture behavior of a permanent mould casting Mg-8.57Gd-3.72Y-0.54Zr (mass fraction, %) (GW94) alloy was investigated under different thermal conditions, i
A new surface protection process was developed to magnesium alloy against corrosion in aggressive environments. Firstly, a phosphate coating was formed on rinse
The process of mechanically assisted hydriding and subsequent thermal dehydriding was proposed to produce nanocrystalline Mg and Mg alloy powders using pure Mg
Compressive properties of AZ31 alloy were investigated at temperatures from room temperature to 543 K and at strain rates from 10-3 to 2×104 s-1. The results s
AZ61Mg alloy was multi directionally forged (MDFed) during decreasing temperature condition from 643 K to 483 K at a true strain rate of 3×10-3 s-1 up to cumul
The static recrystallization of hot-deformed magnesium alloy AZ31 during isothermal annealing was studied at temperature of 503 K by optical and SEM/EBSD metall
The influence of impurity content on the microstructure and mechanical properties of ZK60 magnesium alloys was investigated by optical microscopy, scanning elec
Magnesium matrix nanocomposite reinforced with carbon nanotubes (CNTs/AZ91D) was fabricated by mechanical stirring and high intensity ultrasonic dispersion proc
The microstructure formation and grains refinement of two Mg-based alloys, i.e. AZ31 and AZ91D, were reported using an electromagnetic vibration (EMV) technique