论文部分内容阅读
结合参与裕园工业区净水厂V型滤池施工的实际情况,针对V型滤池的关键部位,探讨了V型滤池施工过程的技术要点及施工措施。在此工程施工实践中,总结了滤板、滤梁的施工及注意事项,H型槽及槽下的配气孔、配水孔施工,V型槽下表冲孔的施工方法,排水槽施工注意事项,确保滤板之间及滤板与池壁之间的缝隙密封严密,滤池内部尺寸的控制,滤池施工中的防渗漏处理,滤板安装嵌缝前必须注重对滤池底部的清洁等。
Combined with the actual situation of the construction of V-type filter in the water purification plant of Yuyuan Industrial Zone, the key points of the V-shaped filter were discussed, and the technical points and construction measures of V-shaped filter construction process were discussed. In this project construction practice, summed up the construction of the filter plate, filter beam and matters needing attention, H-groove and groove under the vent, water hole construction, V-groove punching the following table construction methods, drain Notes , To ensure that the filter plate and the filter plate and the wall between the seal tight seal, the internal control of the filter, the filter construction of the anti-seepage treatment, filter installed before caulking must pay attention to the bottom of the filter cleaning Wait.