论文部分内容阅读
本文推荐一种优质刀片,应用在新型的曲轴铣床上,提高了曲轴加工的效率。美国俄亥俄州曲轴公司,由于采用新工艺,将原曲轴的车削加工改成铣削,从而使原曲轴加工机床每天约9小时的工作量,变成现在的2小时。曲轴加工效率的提高,减少了设备的需求量,这证实了该公司投资350万美元购买单面和双面刀盘的曲轴铣床是经济合算的。该公司使用的曲轴铣床,由美国GFμ公司制造,专门用于加工重型往复式和旋转运动机械的曲轴。加工时曲轴固定不动,内孔嵌有刀片的内切刀盘沿绕轴的程控轨迹回转,切削时刚性良好。然而,该厂工程师发现在曲轴铣床的使用过程中大量消耗硬质合金刀片。由于刀片损耗量大,成本
This article recommends a high-quality blade, used in a new type of crankshaft milling machine, to improve the efficiency of crankshaft machining. The crankshaft company of Ohio of the United States, due to the adoption of new technology, converted the crankshaft turning to milling, so that the original crankshaft processing machine about 9 hours a day’s workload into the present 2 hours. Crankshaft machining efficiency increases, reducing the demand for equipment, which confirms the company invested 3.5 million US dollars to buy single-sided and double-sided cutter crankshaft milling machine is cost-effective. The company uses a crankshaft milling machine manufactured by GFμ, a company specialized in the machining of crankshafts for heavy-duty reciprocating and rotary motion machines. Crankshaft is fixed during machining, the inner hole cutter blade embedded in the cutter along the axis of the programmed trajectory rotation, rigidity cutting good. However, the plant engineer found that consuming the cemented carbide inserts was heavy during the use of the crankshaft milling machine. As the blade loss, cost