论文部分内容阅读
特殊的清洗方式采用纯净碳氢有机溶剂,对工件表面附着的油脂类物质具有优异的溶解性。采用蒸汽喷洗与循环喷淋复合清洗方式,获得理想的清洗效果,同时可实现对盲孔类零件的清洗。采用高温和蒸汽清洗方式,不仅可以增加溶剂的有效溶解性,也可降低附着在工件表面的油脂粘度。配备有CI离子中和剂添加装置,防止清洗过程中CI离子对工件表面的腐蚀。真空干燥采用真空干燥,干燥效果优异,可适用于粉末冶金件清洗,有效清除零件基体所含有的有机物。清洗过程始终使用的是经过再生的纯净的溶剂,保障干燥后工件表面的清洁度。
Special cleaning methods using pure hydrocarbon organic solvents, on the surface of the grease has excellent solubility. Adopts steam spray and circulating spray compound cleaning method, to obtain the ideal cleaning effect, at the same time can realize the blind hole parts cleaning. Using high temperature and steam cleaning, not only can increase the effective solubility of the solvent, but also reduce the viscosity of the oil attached to the surface of the workpiece. Equipped with CI Ion Neutralizer Additive to prevent corrosion of the workpiece surface by CI ions during cleaning. Vacuum drying using vacuum drying, drying effect is excellent, suitable for cleaning powder metallurgy parts, effectively remove the organic matter contained in the parts matrix. The cleaning process is always using a pure regenerated solvent to ensure the cleanliness of the workpiece surface after drying.