【摘 要】
：
Porous titanium scaffold with suitable porous architecture exhibits enormous potentials for bone defect repairs.However,insufficient osteointegration and osteoinduction still remain to open as one of the major problems to achieve satisfactory therapeutic
【机 构】
：
Department of Orthopaedics, Affiliated Zhongshan Hospital of Dalian University, Dalian 116001, China
论文部分内容阅读
Porous titanium scaffold with suitable porous architecture exhibits enormous potentials for bone defect repairs.However,insufficient osteointegration and osteoinduction still remain to open as one of the major problems to achieve satisfactory therapeutic effect.To solve this problem,many studies have been carried out to improve the bioactivity of porous titanium scaffold by surface modifications.In this study,porous Ti6Al4V scaffolds were fabricated using additive manufacturing technique.Porous architectures were built up based on a diamond pore structure unit.Alkali-acid-heat (AH) treatment was applied to create a TiO2 layer on the porous Ti6Al4V scaffold (AH-porous Ti6Al4V).Subsequently,a hydrothermal treatment was employed to enable the formation of HA coating with nanopillar-like morphology on the alkali-acid-heat-treated surface (HT/AH-porous Ti6Al4V).The effects of surface modifications on apatite-forming ability,protein adsorption,cell attachment,cell proliferation and osteogenic gene expression were studied using apatite-forming ability test,protein adsorption assay and in vitro cell culture assay.It was found that the HT/AH-porous Ti6Al4V exhibited the highest apatite formation ability and best affinity to fibronectin and vitronectin.In vitro studies indicated that the mesenchymal stem cells (MSCs) cultured on the HT/AH-porous Ti6Al4V presented improved adhesion and differentiation compared with the porous Ti6Al4V and AH-porous Ti6Al4V.
其他文献
Carbon fiber reinforced plastics (CFRP) are promising lightweight materials for vehicle applications.316L is one of the most widely used types of austenite stainless steels and applied in lots of automotive applications.The existence of crevices will resu
The present work describes the effect of deposition potentials on structural,morphological,optical,electrical and photoconductivity responses of cuprous oxide (Cu2O) thin films deposited on fluorine-doped tin oxide glass substrate by employing electrodepo
The surface of AISI 1045 steel specimens was modified via two duplex surface treatments of (i) titanium diffusion coating followed by plasma nitriding (Ti-PN) and (ii) plasma nitriding followed by titanium diffusion coating (PN-Ti).A comparative study on
Type I hot corrosion behavior of SiO2-Al2O3-glass composite coating based on Ti-47Al-2Cr-2Nb substrate was investigated in the mixture salt of 25 wt％NaCl + 75 wt％Na2SO4 at 850 ℃.The results showed that there was a bidirectional ion exchange between compos
Mg-Zn-Zr series Mg alloys (ZK) are one of the most important commercial Mg alloys due to their good comprehensive mechanical properties.The phase equilibria of the Mg-Zn-Zr system at 400 ℃ covering the overall composition range were investigated by X-ray
In the present study,a quenching treatment prior to two-stage heat treatment was conducted on a Fe-0.28C-1.55Mn-2.06Al transformation-induced plasticity steel to tailor the final microstructure.Compared with the microstructure of the ferrite,bainite and b
The damage behaviors of a titanium matrix composite shaft under torsion loading were monitored using the acoustic emission technique.The composite shaft with SiC fibers at ± 45° orientations was prepared by the solid-state fabrication process.Both the tor
Ni-based self-lubricating composites containing a fixed amount of hexagonal boron nitride (h-BN) (5 wt％) and different amounts of graphene (0-1.5 wt％) were prepared by ultrasonic dispersion,high-energy ball milling,and spark plasma sintering.The effects o
The corrosion behavior of high-strength steel used for flexible riser exposed to CO2-saturated saline solution and CO2-saturated vapor environments was studied through immersion experiment and electrochemical corrosion experiment.The corrosion behavior an
The effect of hot isostatic pressing (HIP) treatment on the fatigue notch sensitivity of Ti-6Al-4V alloy fabricated by electron beam melting (EBM) was investigated.The results indicate that the fatigue notch sensitivity of the as-fabricated samples is muc