分电器触点的烧蚀,与许多因素有关。当然,点火初级回路接线错误及电流电压过高会导致触点的烧蚀,但与触点本身及分电器上电容器等因素也有关,它们在很大程度上也会造成分电器触点的烧蚀损坏。首先,触点的材料是否选用恰当。现普遍用钨作此触点材料,要求粒度很细、再结晶温度较高等。国内钨触点的材料,现推荐使用本溪生产的钨棒制造。 Ablation of distributor contacts is related to many factors. Of course, the ignition of the primary circuit wiring errors and the current voltage is too high will lead to the ablation of contacts, but with the contacts themselves and the capacitor on the distributor and other factors, they will largely result in distributor contacts burn Erosion damage. First of all, whether the contact material is properly selected. Now commonly used tungsten as the contact material, requires a very fine particle size, high recrystallization temperature. Domestic tungsten contacts of the material, is now recommended to use Benxi tungsten rod manufacturing.