Pyroelectric activity in polar hemicyanine Langmuir-Blodgett multilayer films

来源 :ChineseOpticsLetters | 被引量 : 0次 | 上传用户:mulu911
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The Langmuir-Blodgett (LB) films of hemicyanine dyes were prepared by LB technique. The films showed pyroelectric effect. The pyroelectric coefficient measured by the method of integrated charges was 12 'mu'C/(m2K) at room temperature, and the relationship between the orientation of DAEP dye in the films and temperature was studied by polarized Fourier transform infrared spectroscopy (FTIR) spectroscopy and second harmonic generation (SHG). It was indicated that the observed pyroelectricity can be ascribed preliminarily to the structure modification of the polar head groups and the deterioration of the film framework (the first-order phase transition) resulted in the change of spontaneous polarization with temperature.
其他文献
期刊
本文提出了一种直接测量位相型全息记录介质的浮雕深度和折射率改变量的方法,它利用干涉显微镜及带CCD摄像头的微机组成的简单系统,可获得很高的测量精度.本文分析了测量误差以及为使系统保持最高测量精度而应选取的最佳测量条件.
为了研究飞秒激光螺旋加工工艺参数对小孔成形过程的影响, 以304不锈钢为靶材, 选取飞秒激光螺旋钻孔工艺的主要参数, 基于L25(56)正交表设计了5因素5水平正交实验, 分析单脉冲能量、重复频率、旋转速率、焦点下移速率、吹气压力对烧蚀深度影响的显著水平;基于反向传播(BP)神经网络建立这5个因素与材料烧蚀深度之间的关系模型, 并利用正交实验数据对网络进行训练, 通过附加钻孔实验数据对所建立网络的泛化能力进行测试, 结果表明所建立的模型预测误差在3%以内;针对螺旋钻孔的特征参数--焦点下移速率设计单因素实
Based on the principle of virtual equivalent gain, the evolution of self-similar pulses in a normal dispersion-decreasing fiber is investigated. The occurrence of wave breaking during the process under highly nonlinear conditions and the effect of its rev
期刊
基于对大气消光系数时间序列随机性的深入研究,利用成都市2015至2017年秋冬季的大气能见度、相对湿度(RH)、颗粒物(PM10和PM2.5)质量浓度和NO2含量监测数据,反演得到该区域相应时段的气溶胶消光系数时间序列。基于位置、尺度、形状的广义可加模型检测了气溶胶消光系数时间序列的平稳性,并对气溶胶消光系数序列进行了协变量分析。实验结果表明,成都秋冬季气溶胶消光系数时间序列均为非平稳序列,其均值和方差表现为非线性变化。细颗粒物(PM
期刊
本文研究了多光子非线性光学过程中的振幅平方压缩,证明了K光子么正算符Sk(z)(K
为了设计适用于空间望远镜的具有质量轻、刚度高、高面形精度特点的大尺寸反射镜, 提出了基于水平集方法的反射镜拓扑优化设计方法。首先, 在口径1 m反射镜镜体初始结构模型的基础上建立有限元模型, 基于SIGFIT采用DRESP2建立面形RMS的目标响应函数, 将镜面面形精度直接作为目标函数, 在重量约束条件下, 基于变密度算法与水平集拓扑方法分别进行优化设计, 并基于OSSmooth功能对设计结果分离阈值进行研究。通过对优化模型分离阈值进行分析, 得到最优化的输出结构模型。采用水平集方法的拓扑优化设计方法的中