配置3台电动给水泵机组的汽包水位控制系统分析

来源 :电力建设 | 被引量 : 0次 | 上传用户:wanming2000
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
石嘴山电厂扩建工程装机容量4×33MW.4台机组的DCS均采用TELEPERM-XP分散控制系统。机组给水控制系统为全程给水控制,采用电动给水泵及给水旁路调节阀相结合的方式来控制汽包水位。该汽包水位控制系统的特点是采用了虚假水位修正、增益补偿、备用泵联启时勺管跟踪以及失去给水泵的Runback和多个压力之间的大值差作为给水平台前、后的差压来做被调量,因而,该汽包水位控制系统PI调节器的参数容易整定,切换过程平滑无扰,控制系统的稳定性得以提高。 Shizuishan Power Plant Expansion Project Installed capacity 4 × 33MW.4 Units DCS are used TELEPERM-XP decentralized control system. Unit water supply control system for the entire feed water control, the use of electric feed water pump and feed water by-pass control valve to control the drum level. The characteristics of the drum level control system is the use of a false water level correction, gain compensation, standby pump coupling spoon pipe tracking and loss of the pump Runback and the pressure difference between the large difference as the water supply platform before and after the poor Therefore, the parameters of the PI regulator of the drum water level control system are easy to set, the switching process is smooth and the control system stability is improved.
其他文献
电力建设工程的管理要对设计阶段、施工阶段进行成本控制,通过比较、分析、预测、纠偏、检查方法,从组织、技术、经济、合同与信息管理等方面确保工程目标成本的实现。 The
通过开展基建安全性能检验工作,发现了很多严重危害性的设备缺陷,进一步证明了开展电站锅炉压力容器监督、检验工作的重要性和必要性。 Through carrying out the inspectio
梁漱溟(1893-1988)与裴斯泰洛齐(1746-1827)分别是中国和瑞士教育史上具有划时代意义的乡村教育理论家和实践家。他们的教育思想产生在不同的地域,产生的时间也有所不同,但是他们
分散控制系统(DCS)的安装、调试工作,对于保证机组高质量完成168 h试运、移交生产、争创精品工程具有十分重要的作用.通过对若干电厂的DCS在使用中经常出现的问题的分析,提出