论文部分内容阅读
Gypsum is a traditional building material.To improve the humidity-controlling properties of gypsum,we prepared a new type of humidity-controlling composite using the sol–gel method.Methods to determine the maximum equilibrium moisture content and speed of adsorption/desorption were subsequently applied to analyze the performance of the samples.The appearance and structural properties of the samples were characterized by scanning electronic microscopy(SEM).The experimental results show that the humidity-controlling gel with added LiCl exhibits high moisture storage and that the equilibrium maximum moisture content is 5.652 g/g at a 75.29% relative humidity(RH).A mass ratio of LiCl/sol = 0.15 is demonstrated to be appropriate for the preparation of the new humidity-controlling composites.A coarse network with tiny pores is observed on the surface of the new humidity-controlling composites,and this pore network provides sufficient space for moisture adsorption.
Gypsum is a traditional building material. To improve the humidity-controlling properties of gypsum, we prepared a new type of humidity-controlling composite using the sol-gel method. Methods to determine the maximum equilibrium moisture content and speed of adsorption / desalt applied to analyze the performance of the samples. appearance and structural properties of the samples were characterized by scanning electronic microscopy (SEM). The experimental results show that the humidity-controlling gel with added LiCl exhibits high moisture storage and that the equilibrium maximum moisture content is 5.652 g / g at a 75.29% relative humidity (RH). A mass ratio of LiCl / sol = 0.15 is demonstrated to be suitable for the preparation of the new humidity-controlling composites. A coarse network with tiny pores is observed on the surface of the new humidity-controlling composites, and this pore network provides sufficient space for moisture adsorption.