论文部分内容阅读
我厂生产电池锌板的非可逆单机座轧机使用卷筒式卷取机,其主减速机原来采用稀油润滑。因该设备正反运转,速度较低,负载较大,齿面磨损严重,每天漏油约1公斤左右。出轴端漏出的油渗至平面摩擦片上,经常产生打滑现象,影响了正常生产。后来我们改用二硫化钼油膏,把它直接涂刷在卷取机减速机齿面上,通过齿轮运转自行挤压成膜,达到润滑的目的。现将具体介绍如下: 1.卷筒式卷取机技术参数电动机功率:10瓩电动机转速:1450转/分锌带卷重量;87公斤锌带卷规格:350×0.65×320mm
I plant the production of zinc plate non-reversible stand-alone rolling mill with reel, the main reducer originally used thin oil lubrication. Due to the positive and negative operation of the device, the speed is lower, the load is larger, serious wear and tear on the tooth surface, about 1 kg oil leak every day. Oil leakage from the shaft end penetrates into the plane friction plate, often resulting in skidding, affecting the normal production. Later, we use molybdenum disulfide grease, brush it directly in the coiler reducer tooth surface, self-extrusion through gear operation film, to achieve the purpose of lubrication. Will be described in detail as follows: 1. Roll coiler technical parameters Motor power: 10 瓩 Motor speed: 1450 RPM / min Zinc belt weight; 87 kg Zinc coil specifications: 350 × 0.65 × 320mm