盐浴炉主工作电极与变压器铜排的连接靠螺栓压紧,由于气体及其他介质的腐蚀和高温氧化,增大了主电极与铜排间的电阻,因而工作时发热、发红,以致打火而烧伤铜排或主电极,严重时要停炉检修。我们多次改进压紧方法,其收效不大,现采用在主电极表面堆焊铜的方法,彻底解决了上述问题。先将电极与铜排接触部分表面加工成一平面,再用黄铜焊丝在加工出的平面上堆焊一层厚度为 Salt bath furnace main working electrode and the transformer copper row connection by bolt compression, due to the corrosion of gases and other media and high temperature oxidation, increasing the resistance between the main electrode and the copper row, which work fever, red, so that the fight Burning copper or the main electrode of the fire and severe shutdown of the furnace overhaul. We repeatedly improve the compression method, which has little effect, are now used in the main electrode surfacing copper method to completely solve the above problems. First electrode and the copper part of the contact surface is processed into a plane, then the brass wire in the processing of the surface of a layer of thickness