论文部分内容阅读
该自动线适用于焊接6～8毫米货车横梁垂直角焊缝。当调整焊接规范后也可焊接其它部件的垂直焊缝。焊接电源为两台 AB—500型直流电焊机。送丝机构用两台ПШ—5型半自动焊机自动定点送丝。工件在链条带动下沿工作台上的滚轮向前移动,以安装在工作台上的4个限位开关自动控制单个工件焊接的开始与终了。由于采用了两台焊机在工件垂直板的两面同时工作,所以随着工件从龙门架下的通过,焊接工作即告完成。从而使工件可鱼贯而行,流水操作。焊剂是通过龙门架上两只风动回收器自动回收。
The automatic line is suitable for welding 6 ~ 8 mm truck vertical beam fillet weld. Vertical welds of other components can also be welded when adjusting the welding code. Welding power supply for the two AB-500 DC welding machine. Wire feed mechanism with two semi-automatic welding machine ПШ-5 automatic sentinel wire. The workpiece is driven by the chain to move forward along the rollers on the worktable. The four limit switches installed on the worktable automatically control the start and end of welding of the single workpieces. As a result of the two welders working at the same time on both sides of the vertical plate of the workpiece, the welding work is completed as the workpiece passes under the gantry. So that the workpiece can be foundry, water operations. The flux is automatically recycled by the two wind-driven collectors on the gantry.