【摘 要】
：
The feasibility of applying the grain boundary character distribution (GBCD) optimization to Inconel 625 for improving the intergranular corrosion (IGC) resistance was studied. The GBCD was obtained and characterized by electron backscatter diffraction (E
【机 构】
：
State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
The feasibility of applying the grain boundary character distribution (GBCD) optimization to Inconel 625 for improving the intergranular corrosion (IGC) resistance was studied. The GBCD was obtained and characterized by electron backscatter diffraction (EBSD) analysis, and its optimization was mainly attributed to annealing twins (Σ3) and twins related to boundaries formed during thermal-mechanical processing (TMP). Through TMP of 5% cold rolling and subsequent annealing at 1150 ℃ for 5 min, the proportion of low Σ coincidence site lattice (CSL) grain boundaries of the Inconel 625 can be enhanced to about 35.8% which mainly were of Σ3n (n=1, 2, 3) type. There is an increase of 24.8% compared with the solution-treated sample, and simultaneously the large-size highly-twinned grain-cluster microstructure is formed. The grain-cluster is mainly composed of Σ3-Σ3-Σ9 or Σ3-Σ9-Σ27 triple junctions, which is mainly caused by boundary reactions during grain growth. Among them, the IGC resistance of Σ3 grain boundaries, Σ9 grain boundaries and random grain boundaries is sequentially weakened. With the increase of the low ΣCSL grain boundary fraction, the IGC resistance of Inconel 625 improves. The essential reason is the amount of Σ3 boundaries interrupting the random boundary network increases and the large grain-cluster arrests the penetration of IGC.
其他文献
Both experimental and numerical approaches were used to study dynamic failure properties and patterns of flattened Brazilian discs, containing two prefabricated cracks intersected at a varying angle. Mechanism of crack initiation, propagation, and cut-thr
This article explores the effects of doping ferroelectric materials MgTiO3 with different proportions on the properties of polyaniline (PANI). PANI / MgTiO3 composites were prepared by in-situ composite method. Fourier transform infrared spectroscopy (FTI
Hollow silica nanospheres with radical pore on the surfaces were prepared using the assemblies of valine amphiphilic small molecule and benzene as double-templates through sol-gel method in tetramethylammonium hydroxide (25wt%) solution at the stirring ra
High entropy alloys (HEAs) possess good mechanical properties and a wide range of industrial applications. In this paper, phase formation prediction theory, microstructure, properties and preparation methods of light-weight HEAs (LWHEAs) were reviewed. Th
Through the influence of the dosage of culture solution and calcium source on hardness and compressive strength of samples, the formulation of microbial cementitious materials was optimized and defined. The influence of temperature on composition, microst
We demonstrate a 2205 duplex stainless steel (DSS) synthesized by aluminothermic reaction and followed two-step rolling which had a superior yield strength of 863 MPa, ultimate tensile strength of 1103 MPa and an elongation of 21％ at room temperature. The
The active oxygen species in the catalytic oxidation system of Fe(Ⅲ)PcTs-t-BuOOH were identified, and the mechanism of the catalytic oxidation of phenolic substrates was proposed. Quinone imine molecules, the main products of catalytic oxidation reaction,
The changes of the microstructure and the mechanical properties of FeCrMoCBY amorphous coatings prepared by plasma spraying after heat treatment were investigated. 300, 400, 500 and 600 ℃ were selected as the heat treatment temperature, and the crystalliz
A facile modification strategy is developed to promote the proliferation and osteogenic differentiation of rat bone marrow stromal cells (rBMSCs) through deposition of a bioactive calcium silicate (CS) coating on the porous surface of poly (ether-ether-ke
Rolling process based on the plastic deformation as a surface strengthening treatment was employed, aiming to improve the wear resistance ability and functional performance of the high carbon equivalent gray cast iron (HCEGCI). The microstructures and tri