青龙衣胡桃醌类成分富集

来源 :国际药学研究杂志 | 被引量 : 0次 | 上传用户:redpig
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
目的以胡桃醌类成分转移率为指标,通过静态吸附和解吸附筛选最佳树脂,建立青龙衣胡桃醌类成分的富集工艺。方法比较4种不同极性的大孔吸附树脂对青龙衣胡桃醌类成分的静态吸附与解吸性能,筛选出AB8树脂为最佳树脂,优化其工艺参数。结果最佳工艺参数为:上样液浓度0.0760 g/ml、上样p H2.0、上样流速3BV/h,洗脱浓度70%、洗脱体积3BV、洗脱流速2BV/h,径高比1∶10。工艺优化后,青龙衣中胡桃醌类成分的含量由1.026%提升到11.08%,转移率为72.08%。结论 AB8型大孔树脂能有效地富集纯化青龙衣胡桃醌类成分。 OBJECTIVE To determine the optimal resin by static adsorption and desorption of jute peach quinone component transfer rate to establish the enrichment process of the composition. Methods The adsorption and desorption properties of four kinds of macroporous adsorption resins with different polarities on the composition of Qinglongjian juglans quintesis were compared. AB8 resin was selected as the optimum resin to optimize its process parameters. Results The optimum process parameters were as follows: sample concentration 0.0760 g / ml, sample loading H2.0, sample flow rate 3BV / h, elution concentration 70%, elution volume 3BV, elution flow rate 2BV / h, Than 1:10. After process optimization, the content of juglone in Qinglongyi rose from 1.026% to 11.08%, and the transfer rate was 72.08%. Conclusion AB8 macroporous resin can effectively enrich the purified julienne jute quinone components.
其他文献
研究10CrNiCu钢靶板在亚弹速范围内受平头弹冲击条件下的侵彻过程,讨论了应力条件对损伤和断裂的影响。结果表明:在平头弹侵彻条件下,弹孔壁材料的形变强化规律可近似用负指数
基于神经网络技术,根据M963铸造镍基高温合金疲劳试验数据,建立了高温合金疲劳性能预测模型,并进行了M963铸造镍基高温合金相关疲劳验证和分析。结果表明:从提高M963高温合金疲劳
目的以小儿外科为研究对象,就在护理工作中存在的问题进行分析,并提出科学的应对措施,从而保证护理工作所呈现的实效性和护理品质更加突出。方法选取于2018年10月~2019年10月
本文对体育教师的教学策略含义、特点、操作程序、内容、培育方式等若干问题进行初步的探讨.
本文对体育院系体育教育专业术科教师从建立综合评价体系的指导思想、评价原则、评价内容、基本框架等方面先做一些构想,为设计具体综合评价方法做构想性的探索.