【摘 要】
:
To improve the comprehensive mechanical properties of Mg-10Zn-5Al-0.1Sb magnesium alloy,different amount of Ce-rich rare earth (RE) was added to the alloy,and t
【机 构】
:
College of Materials Science and Engineering
论文部分内容阅读
To improve the comprehensive mechanical properties of Mg-10Zn-5Al-0.1Sb magnesium alloy,different amount of Ce-rich rare earth (RE) was added to the alloy,and the effect of RE addition on the microstructure and mechanical properties of Mg-10Zn-5Al-0.1Sb alloy was investigated by means of Brinell hardness measurement,scanning electron microscopy (SEM),energy dispersive spectroscope (EDS) and X-ray diffraction (XRD).The results show that an appropriate amount of Ce-rich rare earth addition can make the Al4Ce phase particles and CeSb phase disperse more evenly in the alloy.These phases refine the alloys matrix and make the secondary phases [τ-Mg32(Al,Zn)49 phase and φ-Al2Mg5Zn2 phase] finer and more dispersive,therefore significantly improve the mechanical properties of the Mg-10Zn-5Al-0.1Sb alloy.When the RE addition is 1.0 wt.%,the tensile strengths of the alloy both at room temperature and 150 ℃ reach the maximum values while the impact toughness is slightly lower than that of the matrix alloy.The hardness increases with the increase of RE addition.
其他文献
To improve the performance of MIMO-OFDM video transmission systems on the limitation of wireless bandwidth and transmitting power,we propose an adaptive joint r
The all-phase fast Fourier transform(apFFT)is proposed as a digital demodulation algorithm in place of the fast Fourier transform(FFT)for orthogonal frequency d
In this paper,the research was focused on optimizing low-temperature heat recovery to adopt multi-effect distillation(MED)in dcsalination by pinch technology.An
Network mobility (NEMO) is a protocol proposed for the mobility management of a whole network.It offers seamless Internet connectivity to the mobile end users.H
In order to resolve the complicated folded fabric modeling problem and establish the high quality finite element model for fabric working simulation in aviation
Experiments were conducted in an 8 m long,40 cm wide,and 60 cm deep re-circulating flume with vegetated banks and gravel bed to study the effects of acceleratin
The strain amplitude-controlled fatigue characteristics of an Al-Si casting alloy and its composite reinforced with 17vo1% Al2O3 fibers (Al-Si/Al2O3) are studied
To reduce the negative impact of channel quantization errors.a low-complexity transceiver joint design scheme for both the transmit beamformers and receive comb