A binary alloy consisting of poly(phenylene-sulfide) (PPS)/ poly(ethylene terephthalate-co-1,4-cyclohexanedimethanol) (PETG) was prepared by the melt blending technology using a twin-screw extruder. The morphology and crystallization behavior of the alloy material were investigated by means of SEM, POM and DSC. The SEM study of the alloy samples revealed that PPS and PETG comprised an incompatible system and the interface structure of two phases could be observed distinctly when the composition of the binary alloy was being changed. The POM results had revealed that incorporation of PETG into PPS could lead to formation of larger spherulite crystals in the course of PPS crystallization, but small and grainy spherulite crystals appeared with further increase in the PETG concentration. The DSC analyses revealed that addition of PETG to the alloy composition could shift the PPS crystallization temperature towards the high-temperature region.