过去一般把自动浇注认为只适用于大量生产。但今天,由于微机控制的技术进步以及有了许多金属水平面传感器,使在小量生产中采用自动浇注越显得有吸引力。浇注很重要,浇得不好会造成废品,有一定浇注速度,浇注要很稳定,不能浇少,也不应浇得太多。现在已有激光束用来控制浇口中的液面±3.0mm。液流 In the past generally considered automatic pouring only applies to mass production. But today, thanks to advances in computer control and the availability of many metal-level sensors, the more attractive it is to use automatic pouring in small quantities. Pouring is very important, poor pouring will result in waste, there is a certain pouring speed, pouring should be very stable, can not pour less, nor should pour too much. A laser beam is now used to control the level in the gate ± 3.0mm. Flow