Surface plasmon-enhanced amorphous-silicon-nitride light emission with single-layer gold waveguides

来源 :ChineseOpticsLetters | 被引量 : 0次 | 上传用户:bbnn1122
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Surface-plasmon (SP) enhancement of amorphous-silicon-nitride (a-SiNx) light emission with single-layer gold (Au) waveguides is experimentally demonstrated through time-resolved photoluminescence measurement. The a-SiNx active layer with strong steady-state photoluminescence at 560 nm is prepared by plasma-enhanced chemical vapor deposition, and the Au waveguide on the top of the a-SiNx layer is fabricated by magnetron sputtering. The maximum Purcell factor value of ~3 is achieved with identified SP resonance of the Au waveguide at ~530 nm.
其他文献
On page 1650021-7, in Appendix B, in the first line “Ref. 23" should be “Ref. 13".
期刊
将激光焊接头与CCD视频跟踪模块集成在一起,提出一种采用一字线激光进行自动化焊缝检测的方法。该方法利用激光三角测量法,得到焊缝的高度、宽度等形状信息。在图像处理方面,对所获得的焊缝区域图像进行中值滤波和二值化处理,获得焊缝特征点二维坐标,实现目标定位,并计算其在世界坐标系下的三维坐标。在跟踪算法方面,采用精度高、速度快的核相关滤波器目标跟踪算法,分别对常见的直线型和曲线型焊缝位置进行跟踪。实验所得
根据图像的几何结构特性,从人类视觉系统特性出发,建立了Gabor感知多成份字典,进而模拟人类视觉通路的层次处理机制,构建了稀疏编码网络,能够有效去除图像中的高阶冗余,形成更为稀疏的表示。对稀疏表示系数重组后进行比特平面量化,实现了低比特率的可伸缩编码。实验结果表明,在低比特率下,本文算法压缩后重构图像的感知质量要明显优于JPEG2000,峰值信噪比也与其相当,并且对于图像中的边缘和纹理等细节保持效果更佳。
基于部分相干理论中交叉谱密度函数的概念研究了平面周期物体的Lan效应文章导出了平面物体Lau像光强分布式,求得了平面周期物体的Lau像光强分布及其Lau成像条件,并进行了实验验证,给出了实验结果.
An experimental and simulation study of warm dense carbon foams at ambient density (ne ~ 1021 cm-3) is presented. This study of isochorically heated foams is motivated by their potential application in carbon
期刊
期刊
We report a 307 W 1018 nm Yb-doped fiber laser pumped by a single 976 nm laser diode. The cavity slope efficiency is up to 75.9% and the amplified spontaneous emission is suppressed by 54 dB. The beam quality of the output laser has an
Objective image quality measure, which is a fundamental and challenging job in image processing, evaluates the image quality consistently with human perception automatically. On the assumption that any image distortion could be modeled as the difference b
Optical detectors with single-photon sensitivity and large dynamic range would facilitate a variety of applications. Specifically, the capability of extending operation wavelengths into the mid-infrared region is highly attractive. Here we implement a mid
期刊
A method to fabricate fiber Bragg grating (FBG) in an optical microfiber (OM) from a conventional photosensitive fiber is proposed in this letter. The cladding of a conventional photosensitive fiber is etched to 17 \mu m. The etched fiber is drawn to an