调整调节器性能的两种方法在调整前，首先应清理好触点，并初步调整衔铁与铁芯间的气隙和触点间隙。截流器触点闭合时，铁芯端面与衔铁间的气隙为０．３～０．６毫米。若气隙不对，可弯曲或伸直固定支架，改变其高度。触点间隙应为０．２５～０．５０毫米，若间隙不对，可... Two ways to adjust the performance of the regulator Before adjustment, the first contact should be cleaned up, and the initial adjustment of the armature and core air gap and contact gap. When the closing device is closed, the air gap between the core end and the armature is 0.3 ~ 0.6mm. If the air gap is incorrect, bend or straighten the bracket and change its height. Contact gap should be 0.25 ~ 0.50 mm, if the gap is wrong, you can ...