【摘 要】
：
Phase constitutions,either changed by alloying or by phase transformation,are the key factors to determine the magnetic and mechanical performances of high-entr
【机 构】
：
State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an, 710
论文部分内容阅读
Phase constitutions,either changed by alloying or by phase transformation,are the key factors to determine the magnetic and mechanical performances of high-entropy alloys (HEAs).Using the AlCoCrFeNi HEA as a candidate alloy,this paper demonstrates the effect of phase transformation on both the mechanical and magnetic properties in the multi-phase system.With increasing heat treatment temperature,the sigma (σ) and face-centered-cubic (FCC) phases disappeared at 1000 ℃ and 1200 ℃,respectively.Such volume fraction changes ofσ,FCC and body-centered-cubic (BCC) phases have divergent effects on mechanical and magnetic properties.The excellent strength-ductility combination will be achieved as the disappearance of σ phase and formation of FCC phase.As for the magnetic properties,the volume fraction of BCC phase plays a major role in determining its saturation magnetization.When the volume fraction change of BCC phase is not evident,the higher volume fraction of FCC phase will influence its magnetization at 2 T.Our present work might provide insights into analyzing the evolution of both mechanical and magnetic properties of HEAs caused by complex phase transformation.
其他文献
The corrosion behavior of 2205 duplex stainless steel was investigated in hot concentrated seawater with different dissolved oxygen (DO) concentration by electr
设计了实验平台,对纤维压缩应变与电阻间灵敏系数进行了标定,将标定后的纤维制作成单丝和多丝复合材料体系压缩试验件。在压缩载荷条件下,通过电阻测量,揭示了多丝复合材料体系纤维断裂对周围纤维的影响规律,并准确测量出纤维发生压缩破坏时的最大变形量;利用数值方法模拟了断口处基体应力分布导致附近纤维微屈曲的损伤过程。
This work investigated the evolution of multiphase microstructure and impact fracture behavior of medium carbon high silicon high strength steel subjected to th
The new generation of Sc and Zr modified Al alloys has been attracted wide concerns in aerospace industry,owing to the excellent mechanical performances and sup
研究了化学成分和热处理工艺对TA5合金棒材力学性能的影响。结果 表明：通过增加铝、氧、氮元素的含量,提高铝强度当量,使得TA5合金棒材强度显著提高,塑性略有降低。随着退
In this work,the Invar 36 alloys were manufactured using cold spray (CS) additive manufacturing technique.The systematic investigations were made on the microst
Lightweight,flexible,ultrahigh-performance electromagnetic-interference (EMI) shielding materials are urgently required in the areas of aircraft/aerospace,porta
As a new class of lithium rich cathodes,disordered rock-salt cathodes have been of primary interest,because of their ability to deliver a promisingly high capac
CsPbI2 Br is an ideal inorganic perovskite material with a reasonable bandgap for solar cell applications because of its advantage of superior thermal and phase
铜钢复合钢板HALF弯片弯曲半径小,冲压成形变形量大,易出现复合界面开裂、脱层问题.采用ABAQUS三维有限元软件对HALF弯片热成形过程进行数值模拟,分析了600℃、700℃、800℃