【摘 要】
：
The particle characteristics of 15% SiC particles reinforced metal matrix composites (MMC) made by powder metallurgy route were studied by using a statistical m
【机 构】
：
School of Materials Science and Engineering
论文部分内容阅读
The particle characteristics of 15% SiC particles reinforced metal matrix composites (MMC) made by powder metallurgy route were studied by using a statistical method. In the analysis, the approach for estimation of the characteristics of particles was presented. The study was carried out by using the mathematic software MATLAB to calculate the area and perimeter of each particle, in which the image processing technique was employed. Based on the calculations, the sizes and shape factors of each particle were investigated respectively. Additionally, the finite element model (FEM) was established on the basis of the actual microstructure. The contour plots of von Mises effective stress and strain in matrix and particles were presented in calculations for considering the influence of microstructure on the deformation behavior of MMC. Moreover, the contour maps of the maximum stress of particles and the maximum plastic strain of matrix in the vicinity of particles were introduced respectively.
其他文献
As novel negative electrode materials for alkaline batteries,the electrochemical properties of four lanthanum transition-metal(La-TM)complex oxides LaTiO3,LaVO4
本文从沥青烟产生的机理和对环境的危害，结合多年产品研发的实际，探讨了沥青烟回收与处理的关键技术。
CeO2 nanotubes were synthesized facilely via a layer-by-layer deposition approach using modified attapulgite as hard template.The formation details were investi
电厂在发电过程中其产生的氮氧化物对环境的危害是巨大的，本文着重介绍了火力电厂烟气脱硝技术的要点，探讨了SCR脱硝技术工艺，从其工艺流程、布置方式及催化剂种类等方面进行了
The phosphor Y2SiO5:Ce3+ was prepared by a sol-gel method and the particle growth process was investigated by XRD, SEM and TEM. After heating at 400 ℃, the as-
The non-isothermal leaching kinetics of primary titanium-rich material by microwave heating was investigated, and the temperature-pressure curves of leaching sy
Gypsum crystallization along with the simultaneous regeneration of KCl was investigated by the reaction of CaCl2 solution with K2SO4. Well developed sheet struc
The as-cast microstructure, tensile and creep properties of Mg-3Sn-1Ca and Mg-3Sn-2Ca magnesium alloys were investigated and compared by using optical microscop
This paper proposes an environment-aware best-retransmission count selected optimization control scheme over IEEE 802.11 multi-hop wireless networks. The propos