论文部分内容阅读
Self-Assembled Structures of Colloidal Silver Nanoparticles on Solid Substrates
【机 构】
：
School of Materials Science and Engineering, Tianjin Polytechnic University, TianJin 300160, China
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
【发表日期】
：
2011年5期
其他文献
In order to overcome the limitation of hydro-rim deep drawing, a new process of hydrodynamic deep drawing (HDD) with independent radial hydraulic pressure was proposed. By employing the dynamic explicit analytical software ETA/Dynaform5.5 which is based o
A simple,and homogeneous detection system for human IgG based on the optical properties of aggregated gold nanoparticles probes were investigated.When gold nanoparticles with about 13 nm in diameter were modified by goat anti-human IgG,the addition of hum
Pure and fluorine-doped silica glass were fabricated by plasma chemical vapour deposition (PCVD) and characterized using Raman and infrared spectrum. The change in Raman in-tensity of 945 cm-1 peak, relating to ≡Si-F stretching vibration, agrees with the
Rietveld Quantitative Analysis of Carbides Precipitation in Normalized-tempered 2.25Cr-1Mo-0.25V Ste
The quantitative determination of the mass fractions of precipitates in steels is very difficult using traditional materials characterization techniques.The Rietveld full-pattern fitting algo-rithm was introduced to solve this problem.The precipitated mul
Fly ash (FA) and ground granulated blast-furnace slag (GGBFS) were added to improve the performances of regenerated binding materials (RBM) which refer to dehydrated phases with rebinding ability of waste hardened cement paste. Flowability tests, compress
In order to make an effectivily recycle use of iron and steel slags that are main industrial wastes generated in Chinese metallurgical industry,the current technologies for reprocessing and recycling these wastes into eco-building materials were reviewed,
Effects of Thermomechanical Treatment on the Mechanical Properties and Microstructures of 6013 Alloy
The mechanical properties and microstructures of 6013 alloy after different ther-momechanical treatments were investigated. The detailed dislocation configurations after deformation and morphologies of age hardening precipitates were examined through tran