论文部分内容阅读
A high quality factor is preferred for a microresonator sensor to improve the sensitivity and resolution.In this paper we systematically investigate the performance of the microcantilever in different resonance modes,which are the first three flexural modes,the first lateral mode,and the first and the second torsional modes.An aluminum nitride-based piezoelectric cantilever is fabricated and tested under controlled pressure from an ultra-high vacuum to a normal atmosphere,using a custom-built vacuum chamber.From the experiment results,it can be seen that the torsional modes exhibit better quality factors than those of the flexural and lateral ones.Finally,an analytical model for the air damping characteristics of the torsional mode cantilever is derived and verified by comparing with experimental results.
A high quality factor is preferred for a microresonator sensor to improve the sensitivity and resolution. This paper we systematically investigate the performance of the microcantilever in different resonance modes, which are the first three flexural modes, the first lateral mode, and the first and the second torsional modes.An aluminum nitride-based piezoelectric cantilever is fabricated and tested under controlled pressure from an ultra-high vacuum to a normal atmosphere, using a custom-built vacuum chamber. Flight the experiment results, it can be seen that the torsional modes exhibit better quality factors than those of the flexural and lateral ones. Finally, an analytical model for the air damping characteristics of the torsional mode cantilever is derived and verified by comparing with experimental results.