论文部分内容阅读
一辆2005年产广州本田雅阁CM6 3.0轿车(搭载BAYA型5速自动变速器)。据车主反映,该车在行驶过程中出现自动变速器打滑的现象,但是故障出现的时间并不确定,所以一直没有进行彻底检查。该车在最近一次高速行驶过程中,有大量的自动变速器油从自动变速器壳体上部通气孔喷出,导致轿车无法继续行驶而被拖进修理厂检修。根据多年维修自动变速器的经验,因为缺少自动变速器油而引发的故障维修起来是比较容易的,一般只需要检查出导致自动变速器油短缺及自动变速器温度过高的原因,并更换烧蚀的摩擦片等部件,然后再进行自动变速器内部清洗即可解决问题。首先检查自动变速器
A 2005 Guangzhou Honda Accord CM6 3.0 sedan (equipped with BAYA type 5-speed automatic transmission). According to the owners reflect the car appeared in the process of automatic transmission skidding phenomenon, but the fault appears uncertain time, it has not been thoroughly inspected. The car at a recent high-speed process, a large number of automatic transmission oil from the upper part of the automatic transmission housing vent hole, resulting in the car can not continue to be towed into the garage repair. Based on many years of experience in repairing an automatic transmission, it is relatively easy to repair faults due to the lack of automatic transmission oil. Generally, it is only necessary to check the cause of the shortage of automatic transmission oil and the temperature of the automatic transmission excessively and to replace the ablated friction plate And other components, and then automatic transmission internal cleaning can solve the problem. First check the automatic transmission