我们的烧结机没有铺底料的工艺设计,在生产过程中,靠调整φ800圆辊给料机下反射板角度的大小来形成自然铺底料的。由于反射板两边的拉杆螺丝不好使用、实际上反射板始终处在一个固定位置,也形不成自然铺底料。在烧结过程中,各生产班的烧结机工,根据自己的生产经验在反射板上插放铁板、铁杠等物,其目的是要使混合料中较大块的物料先布到台车炉篦上,以形成自然铺底料,这样做的结果,烧结机仍然经常出现 Our sintering machine is not the material of the process design, in the production process, by adjusting the angle φ800 round roller feeder under the reflector to form a natural bedding material. As the reflector on both sides of the rod screw is not good to use, in fact, the reflective plate is always in a fixed position, also can not form a natural bedding material. In the sintering process, the production of sintering mechanics classes, according to their own production experience in the reflective plate inserted iron plate, iron bars and other objects, the purpose is to make the mixture of large pieces of material first cloth to the trolley On the grate, to form a natural bedding, the result of doing so, the sintering machine is still often appear