【摘 要】
:
In this study, the microstructural evolution of an as-cast AA3105 aluminium alloy during homogenization treatment was simulated with the ClaNG model.The simulated data were compared with experimental
【机 构】
:
Institut für Metallkunde und Metallphysik, RWTH Aachen, Germany
【出 处】
:
15th International Conference on Aluminium Alloys(ICAA15)(第十
论文部分内容阅读
In this study, the microstructural evolution of an as-cast AA3105 aluminium alloy during homogenization treatment was simulated with the ClaNG model.The simulated data were compared with experimental data.The ClaNG model is a statistical solid-state precipitation model which is based on the classical nucleation and growth theory.The growth function is based on the mean-field approach.
其他文献
The heterogeneous nucleation of S (Al2CuMg) precipitates at dislocations during artificial ageing is a very common phenomenon in Al-Cu-Mg alloy.Specifically, the nucleation of the S variant or variant
The AlCu2Si1Mg0.6 alloy was investigated on a scanning electron microscope with an attachment for electron probe microanalysis (EPMA) and X-ray diffraction analysis (XRD).The measurements of nanohardn
AlCu-based alloys have important applications as high-strength and lightweight materials for the fuselage in aviation (AlCuMg, AlCuLi) and as cast-alloys (AlSiCu) for engine blocks in the transport se
Microstructural examination of the Al-5.3Mg-2.4Si-0.6Mn-1.0Fe alloy in the die-cast condition revealed that a significant number of the primary α-AlFeMnSi intermetallic particles were found inside bot
Voids in aluminium can significantly affect materials performance and a key question is their evolution.We characterised the shrinkage of voids in quenched pure aluminium by performing in-situ anneali
The effects of Sn addition on clustering and age-hardening behavior in an Al-0.6Mg-1.0Si (mass %) alloy were investigated.The specimens were solution treated at 843K and quenched followed by pre-aging
The steering support is the important part because it is high demand for safety, vibration and noise reduction, and as the connection and supporting the dashboard, various electrical appliances and in
The influence of modes on heat treatment of ingots and semi-finished products from alloys A1-Mg-Sc and Al-Cu-Li systems on the structure, phase composition and grain structure was studied.The EBSD dat
The microstructure evolution during the homogenization heat treatment of Al-Mg-Si-Fe-Mn, or AA6xxx, alloys has been investigated using a combination of modelling and experimental studies.The model is
One of the main goals in this work has been to maintain initial material strength, while keeping the added solute level to a minimum.It was found that replacing some Mg and Si with Li in a lean Al 606