Working from Both Sides: Composite Metallic Semitransparent Top Electrode for High Performance Perov

来源 :第三届新型太阳能电池学术研讨会 | 被引量 : 0次 | 上传用户:snsjgl
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Organic-inorganic lead halide perovskites offer intriguing optoelectric characteristics including high carrier mobility,long charge diffusion length,and particularly,cost-effectiveness and have thus been a central research topic in photovoltaic applications.We report herein perovskite solar cells using solution-processed silver nanowires (AgNWs) as transparent top electrode with markedly enhanced device performance,as well as stability by evaporating an ultrathin transparent Au (UTA) layer beneath the spin-coated AgNWs forming a composite transparent metallic electrode.
其他文献
During the growth of CH3NH3PbI3-xClx (MAPbI3-xClx) perovskite films by the two-step inter-diffusion method,the presence of a trace amount of oxygen gas is critical to their physical properties and pho
经过六年的努力,钙钛矿太阳能电池的光电转换效率从3.8%提高到20%多,并且由于其制作成本相对较低,工艺易操作等优点引起了科学界广泛的关注.在钙钛矿太阳能电池光阳极材料研究中,人们除了研究制备不同形貌的TiO2 如:纳米管、纳米棒等来提高电池的性能外,还有对TiO2 基质进行掺杂处理.掺杂元素一般有金属掺杂和非金属掺杂两类,非金属元素掺杂的出发点是基于TiO2 基材中存在大量的氧缺陷浓度,会降低电
Since Miyasaka1 first reported perovskite absorber used for photovoltaic applications,the power conversion efficiency of perovskite solar cells (PSCs) has rocked to certified 22.1% (certified) in just
Hole-conductor-free printable perovskite solar cells employ a triple mesoscopic layer structure of TiO2/ZrO2/Carbon and no hole-conductor or Au contact is required.A new mixed-anion perovskite of CH3N
Solvent engineering strategy was developed and utilized to optimize the hole-conductor-free fully printable perovskite solar cells (PSCs) based on pristine perovskite MAPbI3 as light harvester via one
Herein,we reported the nonlinear optical response of triiodide (CH3NH3PbI3) and mixed halide (CH3NH3PbI3-xClx) perovskite thin films.The results demonstrated that they have large nonlinear refractive
会议
We developed a facile,but efficient,layer-by-layer approach to uniform CH3NH3PbI3-xClx perovskite flat films for high-performance perovskite solar cells (Figure 1,left).1 Briefly,a thin layer of Lead
会议
Formamidinium lead iodide (FAPbI3) is a more promising absorber material than methylammonium lead iodide (MAPbI3) for PSCs because of its smaller bandgap(1.48 ev) and better thermal stability.In previ
钙钛矿太阳能电池中电子传输层的材料一直是以TiO2 为主,由于需要450℃的高温烧结而制约了其在柔性钙钛矿电子器件上的应用.因此寻找其它材料替代TiO2 作为空穴阻挡层一直是近年来冉冉升起的钙钛矿电池的一个研究方向.与TiO2 相比,SnO2 由于其相对较高的电子迁移率和本身较宽的光学带隙在最近引起了广泛关注.然而其较浅的导带能级和薄膜本身存在的一些缺陷制约了其进一步的应用.本文通过一种简单的Ti
Hygroscopic lithium-bis(trifluoromethane)sulfonimide (Li-TFSI) and corrosive pyridine doped 2,2,7,7-tetrakis( N,N-dipmethoxyphenylamine)-9,9-spirobifluorene (spiro-OMeTAD) in perovskite solar cells ge