Studies on Vitrification of Arsenic-containing Fly Ash from Lead Metallurgical Industry

来源 :The 12th International Symposium on East Asian Recycling Tec | 被引量 : 0次 | 上传用户:xl122700059
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  During the production process of metallurgical industry,approximately 30%of arsenic is carried into off-gas and subsequently trapped in fly ash,which is a main source of arsenic pollution to the surrounding environment.
其他文献
  A glycine modified persimmon powder was used as biosorbent for platinum adsorption in aqueous solution.
  Its hard to use traditional methodstoseparate Sn-Pb-Sb alloys which come from metallurgy process of tin,lead,copper and recycling process of tin secondary r
  The dispersive high-quality spherical silver powder was prepared by ascorbic acid reduction of silver nitrate,which was recovered from silver waste.
  Tons of neutralization sludge(NS)is generated every year during the conventional lime-neutralization process.
  It has been known that there are large amount of nitric acid and valuable metals,e.g.,copper and nickel,etc,in the plating waste solution of automobile whee
  Converter steel slag is the waste residue generated by steel making process.Production of 1 ton of steel produces about 0.15 tons of steel slag.The global a
  Using blister refining Cobalt-rich slag as raw material,the leach liquor was obtained by sulphuric acid oxidation leaching,and Co3O4 powders was prepared by
  A simple approach for fabrication of multi-doped aluminum titanate composites from Ti-bearing blast furnace slag(Ti-slag)is described.
  The objective of the present study is aimed to investigate for the extraction of cobalt from Co-Ni sulfate solution in a continuous scale mixer settler at t
  The extraction of copper from Cu-Co-Ni sulfate solution in a continuous scale mixer settler was investigated in this study.