The study of fire resistance of concrete

来源 :2012 Postdoctoral Symposium of China on Materials Science & | 被引量 : 0次 | 上传用户:yu_threestone
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  This work aims to study the effect of sintering temperatures on the compressive strength and weight of net paste concrete.The compressive strength and quality variety of concrete which undergo different sintering temperatures (400℃、 600℃、 800℃、 900℃) and sintered at different times (1h, 2h) are studied through experiments and theoretical analysis.By using XRD explore the inner of sample chemical composition and further obtain the mechanism about sample of weight loss and strength loss.Experiments indicate that the higher sintering temperature and the longer sintering time, the more loss of compressive strength and weight.
其他文献
By use of material studio software, the lattice constant, band energy gap and optical permittivity of silica are calculated, and to be used as the key parameters to investigate the microwave dielectri
The unidirectional polyacrylonitrile (PAN)-based triangle-section carbon fiber reinforced plastics (PAN-TCFRP) and the unidirectional PAN-based circular-section carbon fiber reinforced plastics (PAN-C
In the present work, the NiCoCrAl alloy sheet was fabricated by electron beam physical vapor deposition technique and the effect of the heat treatment on the microstructure and tensile strength of the
The cooling curves of ductile cast iron had been measured at workshop by thermal analyzer.Cooling curves and image analysis software were used to describe different samples.Relationships between the n
Microstructures of as-cast and extruded ZK60-xRE (RE=Dy, Ho and Gd, x=0~5) alloys were investigated by optical microscope, scanning electron microscope, transmission electron microscope, X-ray diffrac
A novel hybrid Cu matrix composites reinforced by graphite particle (Gr) with volume fraction of 5-15% and nano-SiC particle (nano-SiCp) of 3% has been prepared by powder metallurgy.The results show t
TiB whiskers reinforced pure Ti (TiBw/Ti) composites with a novel network microstructure were successfully fabricated by reaction hot pressing (RHP).TiBw are in situ synthesized around the large pure
The new generation hydro-cracking reactors are usually made of 2.25Cr-lMo-0.25V steel.After austenization at 940℃ of the hot-rolled sample, the study show that the microstructures of the steel after w
SiCp/2024Al composite foams were manufactured by powder metallurgical methods using foaming agent CaCO3.The fabrication technology of composite foams was researched, and their compressive properties a
To improve the fatigue performance of metal materials which are applied in the aeroplane structure is a significant objective of new material research.In recent decades, it becomes a common view that