【摘 要】
：
Some high-temperature environment would cause a comparatively large loss ofpre-stress on pre-stressed CFRP plate or give rise to failure due to the unstable holding of anchor holder on CFRP plate,when
【机 构】
：
Chongqing Communications Research and Design Institute,Chongqing,China
【出 处】
：
The 7th International Conference on Bridge Maintenance, Safe
论文部分内容阅读
Some high-temperature environment would cause a comparatively large loss ofpre-stress on pre-stressed CFRP plate or give rise to failure due to the unstable holding of anchor holder on CFRP plate,when the structures are strengthened at special areas.In order to test the effect of wave-shape-gear-grip anchor (WSGA) on the anchor properties and pre-stress loss of CFRP plate under high temperature,a group of pre-stressed CFRP plate specimens are designed for testing of stress loss under high pre-stress (about 2000 MPa) and high temperature (about 85℃C),and finally the CFRP plate is subject to tensile wrecking to check if the anchoring performance of WSGA is degraded.The result (as fig.l) shows that,with no view of the short-term stress loss of CFRP plate during releasing,the total stress loss ofpre-stressed CFRP plate is below 3% in 11 days of high temperature and stress.The tensile breaking test also proves that the CFRP plate has a good anchoring performance on the WSGA.
其他文献
This paper studied the RC-girder severely damaged by chloride induced deterioration in the east coast of the main island of Okinawa.Distant visual inspection was performed prior to removal of the gird
Crossing the North Saskatchewan River in Prince Albert,Canada the Diefenbaker Bridge was constructed in 1959.The structure is one of the most important crossings in central Saskatchewan accessing majo
Maintenance of aging infrastructure is a burden on many organisational budgets,and Life Cycle Cost Analysis (LCCA) is accepted as an effective method to reduce these costs.However,LCCA becomes extreme
At present,due to the hidden troubles in scheme,design and construction,as well as Chinese basic condition "respect construction and despise maintenance",many problems have appeared in some just finis
A detailed study to assess the condition of existing highway bridges was carried out by establishing a multi-index comprehensive evaluation model.
The seismic-resistant design of structures,is generally performed under a unique ground motion excitation at the base,regardless its type,shape and planar extension.However,for extended structures,suc
Deterioration of steel cable-stayed bridges is often found in stay cables,steel girders and foundations.Structural durability problems mainly contain fatigue and erosion of the cables and steel girder
Structural characteristics are extremely important to the durability design process of concrete bridge,yet are not considered sufficiently by the design parameters in current durability design codes a
Steel orthotropic bridge deck is the only system likely to provide a service life exceeding 100 years with minimum maintenance; however,concerns of inservice fatigue cracking from welded connections,a
The traffic load effects on existing bridges may be quite different from those of design live loads due to various traffic environments.However,the bridge maintenance and safety assessment of in-servi