A Novel Method for Topology Optimization of Heat Conductive Objects-Volume-of-Solid Method

来源 :2nd International Workshop on Heat Transfer Advances for Ene | 被引量 : 0次 | 上传用户:jianzhu119
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  A novel computational method for shape and topology optimization of heat conduction problems is presented in the present study.A volume-of-solid (VOS) function equation is proposed, and it is coupled with the heat diffusion equation in an iterative solution procedure to yield the optimal shape design of the heat conductive objects.
其他文献
In the waste heat recovery finned tube heat exchangers are widely adopted.In this paper, a three-dimensional simulation was carried out on gas-particle flow across a 4-row circular finned tube bundle
An experimental study on R22, R134a and R410a film condensation on single horizontal tube including a smooth tube and a doubly enhanced tube was conducted at the saturation temperatures of 39 ℃.A Wils
Many high-power electronic devices such as high-power LED devices and aerial devices work intermittently.If some of the heat generated by the chips could be stored in the working time with the thermal
Sublimation is one phase change mechanism that usually happens under low-to-moderate temperatures and at the same time large amounts of latent heat is absorbed or released.Low temperature sublimation
A global model of heat transfer, including melt convection, solid conduction, surface radiation and crystal internal radiation, is established for a sapphire crystal growing system by heat exchanger m
As a important heat transport carrier, liquid metal has been widely concerned in thermonuclear fusion reactor and accelerator driven sub critical system in which the multiphase flow research of liquid
This paper aimed to study the effect of the second baffle on the thermodynamic performance of the liquid-vapor separation condenser (LSC).Three baffles with different orifice diameter and number were
In this paper, the micro-electrodes measurement is employed for local transient flow process experimental research in the spheres packed beds.Three kinds of beds packed with 4mm, 6mm and 8mm diameters
Cryogen spray cooling with R134a has been widely used in the laser dermatology such as port wine stain to prevent the unspecific thermal injury, due to the absorption of laser energy by the melanin in
A steady two-dimensional volume of fluid (VOF) simulation of laminar film condensation of vapor with and without non-condensable gas inside a 1 mm horizontal microchannel is presented.Uniform interfac