【摘 要】
：
Biodegradable temporary ureteral drainage stent combines adequate ureteral drainage and patient satisfaction after uncomplicated ureteroscopy, eliminating the need for stent removal.
【机 构】
：
Key Laboratory of Textile Science & Technology of Ministry of Education, College of Textiles, Donghu
【出 处】
：
The 12th Asian Textile Conference (第12届亚洲纺织会议暨2013年纺织学术年会)
论文部分内容阅读
Biodegradable temporary ureteral drainage stent combines adequate ureteral drainage and patient satisfaction after uncomplicated ureteroscopy, eliminating the need for stent removal.
其他文献
In this study, the influence of carrier speed and take-up rate on braid angle was investigated.Samples with different angles by changing carrier speed, take-up rate and ratio of them were produced and
Fabric formed concrete linings are constructed of two fabric layers that are pump filled, in place, with a structural fine aggregate concrete grout.
The quasi-static and low-velocity impact behaviors of integral glass fiber knitted fabrics reinforced tube composites at different low velocities were tested.The impact characterizations were reported
This paper researched the feasibility and technical processing control of the production process of Spunlace Nonwoven using PVA fiber as raw material through the comparison of molecular structure and
The quasi-static and low-velocity impact behaviors of curved glass fiber multi-axial warp-knitted (MWK) fabrics reinforced composites at different curvature levels were tested.
Nickel-hydrogen battery has been commercialized as power source of hybrid electric vehicle because of its higher specific capacity, excellent security, no memory effect and long life.
Electron beam grafting method was applied to give cesium absorbent property on a commercial non-woven fabric, which is prepared steam-jet method using shell/core hybrid fibers.
Carbon fiber-reinforced polymer matrix composites have the excellent features, such as high strength-to-weight ratio, stiffness properties, corrosion resistance, and wear properties.
In this paper, SEM, AFM, contact angle measurement are used to study on surface morphology of glass fiber and its wetting characteristics with resin.
With the rapid development of the knowledge economy and the information society, the importance of some elements of the traditional industry clusters have changed, which makes this cluster model adapt