Research on the Fiber Laser Cochlear Implant Based on Photoacoustic Effect

来源 :第十届全国激光技术与光电子学学术会议 | 被引量 : 0次 | 上传用户:gaylene
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  The diffusion current is a difficult obstacle of electronic cochlea.The current diffusion in nerve tissue limits the number of implantable electrodes.It limits selectivity of the auditory nerve,affects the music quality and melody information of transmission.Laser has better directivity,and the adjacent fiber laser does not occur mutual interference.
其他文献
最佳化是美学、达尔文生物进化论和系统生物学的中心概念。艺术最佳满足黄金分割。本文发现功能和应激的最佳都可以满足黄金分割。功能最佳就是正则功能。正则功能的黄金规则表现在功能本身的变化和引起变化的干扰因素的剂量范围。成功应激提升正则功能的功适能,其黄金规则表现在正则功能的提升方面。
A discussion and a new attack ondouble images encryption method with resistance against the special attack based on an asymmetric algorithm(DIEM)are presented in this paper.The analysis shows that the
会议
In the paper,a decoupling method for homogeneous and dual-medium cellsrefractive index,and the entropy tomographic phase imaging method are proposed.Based on the decoupling method,the 3D morphology of
会议
利用脉冲光抽运光子晶体光纤或微纳光纤,基于光纤中自发四波混频过程,制备了一种在室温下波长连续可调谐的量子关联光子对源.当抽运光中心波长在1030 nm 至1050 nm 变化时,可使关联光子对中闲频光子的波长在750 nm 至900 nm范围内调谐,而相应的信号光子波长调谐范围为1260 nm 至1625 nm.
能量问题是决定脉冲数字全息抽运-探测系统能否正常工作的关键问题,激光器的总能量应同时满足抽运系统和探测系统的需求。提出了一种测算探测系统所需能量最低值的方法。针对一个脉冲数字全息光路系统,通过计算得到了探测系统对入射光强的衰减倍率,并且用迈克尔逊干涉仪测出了用以记录干涉条纹的CCD 能够有效记录全息图的能量临界值。
聚合物有机太阳能电池成本低、工艺简单、可制备成柔性器件,同时PIN 型的体异质结有机太阳能电池,因加入了高掺杂的传输层,转换效率提升,而被广泛关注。本文采用传输矩阵模型,结合Matlab 软件分别模拟研究了入射光的波长、有机功能层不同的混合比及其厚度对PIN 型有机聚合物太阳能电池中光场强分布的影响。
We proposed a novel rectangular lattice dual-core photonic crystal fiber and numerically investigate its birefringence and dispersion.Based on the plane wave expansion method,its high birefringence an
会议
We propose a superradiant laser based on two-photon Raman transition of cesium -133 atoms which collectively emit photons on an ultra narrow transition into the mode of a low Q resonator known as opti
For a long communication distance,the divergence angle of laser transmitting by space laser communication system must be narrow to solve the energy problem.However,it need be magnified during the grou
会议
研究了飞秒激光器、皮秒激光器和纳秒激光器与CuNiSnP 非晶带材之间相互作用的过程,并利用微区X 光衍射仪和扫描电子显微镜分别对加工后的材料成分和表面形貌进行分析。研究发现,CuNiSnP 非晶带材在经过飞秒激光、皮秒激光和纳秒激光照射后,都有晶化过程发生,但是晶化程度有明显的差异。