Supercontinuum generation in tellurite microstructured fibers and glass

来源 :第七届中国功能玻璃学术研讨会暨新型光电子材料国际论坛 | 被引量 : 0次 | 上传用户:blanknan
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  Supercontinuum generation in various silica fibers has attracted the interest of researchers in recent years due to its extensive applications in nonlinear optics.Highly nonlinear silica fiber with engineered dispersion makes it possible to obtain broad SC spectrum by bench-top device with easy maintenance.Nevertheless, silica fiber has two main limitations: low nonlinearity, and poor transmission range in mid-IR.Tellurite glass fiber can offset these limitations well.Its nonlinearity can be higher than silica fiber by several orders of magnitude, and it can be transparent in mid-IR.In this talk, I will present our recent researches on novel tellurite microstructured fibers and supercontinuum generation in them.The fibers include wagon-wheel fiber,suspended nanowire, composite microstructured fiber, etc.The supercontinuua are generated by low threshold pumping in fs, ps, or quasi-CW regime.We also investigated the supercontinuum generation in tellurite glass through filamentation.The main advangtage of supercontinuum by glass is that: the negative influence of accumulated loss can be reduced greatly, so the transparent window of glass is much larger than fiber.By using a piece of tellurite glass we have obtained ultra-broadband supercotinuum generation which almost covered the whole transparent range of tellurite glass.
其他文献
对氯化钾镀锌生产中几个易被忽视的问题进行了探讨,从中可以看出,有些措施是相互矛盾的.如提高pH值可提高浊点,但有时则降低镀液的分散能力;添加光亮剂改善低电流密度区亮度,但易引起镀层防护能力的降低等.因此,应根据生产要求,产品性能的要万锄口以调节控制.
总结了碱性锌镍合金工艺参数对镀层的影响及镀液的稳定性因素,提出了解决方法和预防措施,展现了锌镍合金工艺的发展前景.
以波纹波长、波纹波幅作为波纹纱结构特征的衡量指标,运用二次回归正交设计,研究花式捻线机在不同工艺参数条件下的波纹纱结构变化规律,建立了花式捻线机工艺参数与波纹纱结构的关系模型,提高花式线设计水平,为优化波纹纱生产工艺提供基础条件.
Lanthanide ions (Ln3+)-activated nanomaterials have been intensively explored as nanothermometers (NTMs) that can be used as optical thermal probes in various fields.[1] For instance, Ln3+ doped upcon
会议
Luminescent adjustable quantum dot (QD)-solid nanocomposites have drawn great attention to telecommunication, microelectronics and optical devices, but fabricating and tailoring the luminescence of su
采用熔融法制备了Tb3+掺杂的Bi2O3-B2O3系统玻璃,研究Bi离子含量对玻璃发光性能的影响。研究结果表明:Tb3+掺杂的Bi2O3-B2O3玻璃由[BO3]、[BiO3]、[BO4]、及[BiO6]共同组成,且随着Bi2O3含量由25mol%增加到65mol%时,玻璃的变得结构疏松。当Bi2O3的含量大于等于45mol%时,出现Bi2+的571nm特征发射峰,说明部分Bi3+转化为Bi2+,
会议
As we know, germanate glass fibers are promising medium to obtain 2 μm laser outputs, while all 2μm pulsed laser outputs generated from germanate glass fibers are active Q-switched which requires addi
White light-emitting diodes (W-LEDs) have attracted persistent attention in recent decades due to their magnificent advantages [1].During the development of W-LEDs, one of the major concern problems i
会议
Broadband excited near-infrared (NIR) to visible up-conversion (UC)provides a new approach to entirely harvest NIR solar energy to apply in solar cells [1-3].This is a simulated experiment of broadban
会议
传统的节能镀膜玻璃可以分为阳光控制镀膜玻璃和低辐射镀膜玻璃,分别应用于炎热地区和寒冷地区.本文研究兼具阳光控制和低辐射功能的TiN镀膜玻璃的常压化学气相沉积法制备及其改性.通过控制反应温度、反应时间和喷嘴与基板间的距离等参数,在500-600℃获得了性能良好的低辐射镀膜玻璃.在此基础上,通过改变反应流量,在玻璃基板上获得了一系列非化学计量的TiNx薄膜.发现,在x=0.89-1.28的范围内随着x