Effect of Curing Conditions on Hydration Process of Lime Added Polishing Residue and Steel Slag as S

来源 :The 14th International Congress on the Chemistry of Cement ( | 被引量 : 0次 | 上传用户:leinuo2222
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  China is the largest country produce building ceramic and steel in the world.Large amount of industry solid waste such as ceramic polishing residue (PR) and steel slag (SS) were produced during the process.Currently,the majority of PR and SS were directly discharged into landfills, which is an unsatisfactory solution from both ecological and economic points of view.Since the major constituents of PR are SiO2 and A12O3 with some minor constituents such as CaO, MgO, PR can be used as a low-cost raw material in silicate products.An innovative approach of reusing PR and SS as supplementary cementing materials in silicate products was studied in the paper.Composite cementing materials were prepared by lime and supplementary cementing materials, such as PR and SS.Effects of curing conditions, water binder ratio and content of SS and PR on compressive strength,chemical combined water, pore solution pH value and microstructure of lime mixed with SS and PR were investigated.
其他文献
In the development and optimization of supplementary cementitious materials (SCMs), it is of high importance to have relatively fast and simple methods to evaluate their reactivity in cement-like syst
Advancement in concrete technology in recent years is generally focused on the strength and durability of structures during the design of cement concrete.Portland cement plays an important role in the
Surfaces of quartz tailings were modified in laboratory through calcining 850℃ for lh with carbide slag.The mineral phase, chemical compositions and the microstructure of the modified quartz tailings
Recycled glass has already been used as concrete fine aggregates or cement substitute.However, its amorphous nature can promote and develop alkali-silica-reaction (ASR).ASR usually occurs when glass i
Metakaolin has been presented as very good pozzoianic material for using in lime mortars and cement mortars.Alternatively, many studies have shown that wastes, coming from the kaolin production, can p
会议
The present study investigates the effect of addition of shrinkage reducing admixture on the hydration properties of cement pastes at different curing conditions.Four mixtures were prepared using 0, 1
The design of green engineered cementitious composites for improved sustainability of cement manufacture is presented.Development of a new class of more sustainable cement-based materials can be achie
The effect of calcium formate on water requirement of normal consistency, compressive strength, drying shrinkage and rate of mass loss of cement pastes containing fly ash were studied.The influence of
The use of calcined clays as supplementary cementitious materials (SCMs) may provide a valuable contribution to the reduction in CO2 emissions associated with cement production since calcined clays ca
Blended binder systems in concrete have been in use for many years.However, over the recent discussions on the sustainability of cement and concrete the topic became of paramount importance for the co