【摘 要】
：
Root Cause Analysis has become a very popular tool to help find the Root Cause leading to incidents, including serious consequence that resulted from erroneous NDT findings. In this presentation, a s
【机 构】
：
Apollo Associated Services Asia-Pacific Limite, Hong Kong
论文部分内容阅读
Root Cause Analysis has become a very popular tool to help find the Root Cause leading to incidents, including serious consequence that resulted from erroneous NDT findings. In this presentation, a structured methodology will be introduced to help us look into the problems, in particular, problems associate with NDT practices. It is important for us to understand that in order to make good and effective use of our NDT techniques, we need to fully understand what happened when someone failed to detect a defect, or found a defect that does not really exists.
其他文献
Delamination is one of the most common defects in carbon fibre reinforced plastic (CFRP)components, such as those used in aircraft and for wind turbine blades. To detect delaminations, different NDT m
目前常规的涡流检测方法有检测速度快、表面灵敏度高等诸多优点，因而获得了广泛应用。但在现代涡流检测中，随着特种金属制品、金属与非金属复合材料科学的发展需求，而有应用频率跨度增大、检测精度要求提高，工作时间更长等特点，使传统的涡流检测在某些检测条件下显得捉襟见肘。文章提出了一种涡流扫频检测技术方法，设计了检测样机，并验证了该检测方法的有效性。
The paper reports the experimental stubby of detecting second-layer saw-cut in Boeing 747mid-spar lower chord by three modes: using combination of low frequency eddy current (LFEC) ring probe and SSEC
Secondary Side Inter granular Attack and Stress Corrosion Cracking (IGA/SCC) have affected all major steam generator designs. According to the statistics, roughly 50% of all Pressurized Water Reactor
Detection of deep hidden cracks under fasteners (CUF) poses a major challenge in traditional eddy current testing (ECT) techniques because the weak eddy current signal due to skin depth or penetration
Three-dimensional (3-D) numeric simulations, based on the finite element model, are conducted to simulate the inservice inspection of the axial cracks typical of stress corrosion cracking (SCC)in ferr
为简化涡流检测系统中激励信号的设计与降低检测系统的复杂性，论文采用SPWM技术设计了涡流激励源。在单片机内部由计算输出信号所对应开关器件的通断，并经过滤波为涡流探头提供激励。实验结果表明，该方法简单实用，可降低涡流检测系统的硬件设计并具有较好的灵活性。
从机理和应用两个方面对磁记忆技术进行了较深入的探讨，对X80等不同材料多个试件进行了拉伸工况下的检测，在不同载荷状态下收录了试件法向漏磁场强度和梯度的变化，得到了各种工况状态下的信号特征，并对各类磁记忆信号的差异和特点进行了分析，而后由磁记忆信号Hp(y)与斜率│k│的变化趋势来判断试件所处的应力状态，为这种先进技术的实际应用提供了理论基础和检测依据。此外，又通过锅炉汽包焊缝的检测实例探讨磁记忆技
采用无损探伤的手段对焊缝等钢结构进行质量检验是确保钢结构工程质量的重要环节。涡流检测在钢结构焊缝应用中受提离效应影响较大，本文初步探讨对其抑制。
介绍了在Linux平台下使用共享库技术使便携式无损检测仪的用户界面实现了多语言化的功能。给出了基于C++语言多态特性的具体实现过程以及相应的代码。